Heya Guys New to This Help PLZ

[weasel2010]

Wanting to overclock abit any and all help would be appreciated

Cpu - Kentsfield Q6600 2.4 GHz Stepping "B" , Revision "G0"
Cpu Cooler - CoolerMaster V8
MB - Asus P5Q
Ram - Transcend Axe Ram TX 1066QLU-4GK
Gfx - MSI Nvidea 260GTX-T2D896-OC

Thanking every one in advance

Ps : I am still waiting for them to deliver my v8 cooler will be here in about
2-3 days

 

[jsc]

This should be your first stop.
HOWTO: Overclock C2Q (Quads) and C2D (Duals) - Guide v1.6.1
http://www.tomshardware.com/forum/240001-29-howto-overclock-quads-duals-guide

Next stop should be a guide for your particular motherboard. Google is your friend.

Go through the guides. Then take your core voltage off Auto and set your memory voltage to factory recommended values. Change the System Memory Multiplier (or whatever your BIOS calls it) from AUTO to 2.00, 2.00B, or 2.00D - whichever you need to set the Memory Frequency to twice the FSB. (Asus uses something called "straps".) Then when you increase the FSB, the memory clock will rise in in proportion with it. At an FSB of 266 MHz, your memory clock should be at 533 MHz.

Download CPU-Z to check your FSB:RAM ratio. It should be a 1:1 ratio.

Keep your core voltage under 1.5 volts and keep your load temps under 70 C.

 

[sirheck]

Not a guarantee but you should be able to get her to 3.6.
Good luck.

 

[weasel2010]

hi guys back got the cooler tonight about time well
i set the oc with asus ai tool to 3.2
and ran real temp 3.4 and prime 95
under 100% load temps maxed out at 69 69 67 67
is this good or bad