Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > Gigabyte Ep45-UD3P LAN problem.

Gigabyte Ep45-UD3P LAN problem.

Forum Motherboards & Memory : Gigabyte - Gigabyte Ep45-UD3P LAN problem.

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
wordplay   04-13-2009 at 04:31:01 PM

My Gigabyte Ep45-UD3P give me LAN problem . I have updated the driver for the LAN. For the past few week its work smoothly. But today its give problem, one LAN cant use but another one can use. Please help me guys.

Add a reply
Sponsored Links
Register or log in to remove.
Bronze Motherboards badge GhislainG   04-14-2009 at 03:45:10 AM
- 0 +

Can you be more specific about the issues and what type of network you have (100 Mbps, Gigabit, hub or switch)? Are you using DHCP or did you assign static IP addresses? Are both NICs teamed?

Reply to GhislainG
wordplay   04-14-2009 at 05:22:08 PM
- 0 +

My pc details :

 

Mobo : Gigabyte EP45-UD3P

 

CPU : E7400 2.88 Ghz

 

RAM : 4GB

 

GPU : Ati 4850

 

Modem : D-Link DSL-2640T(wireless ADSL2+Router)

 


The motherboard have 2 port for LAN. After this build the both port LAN work

 

smoothly to connect to modem. Yesterday the first LAN port unable to use., but the

 

second LAN port can use. This happen when I switch on the pc and modem . Then I

 

switch off the modem accidentally. Then i switch on back, the first LAN did't

 

connect to modem and I have check the LED at first LAN port is not on. Then I change

 

to second LAN port, it work.
____________________________________________________________________________________________________

 

GhislainG

 

I dont know about DHCP and NICs teamed.

 

I'm using dynamic IP, not using static IP addresses


Message edited by wordplay on 04-14-2009 at 05:45:00 PM
Reply to wordplay
Bronze Motherboards badge GhislainG   04-14-2009 at 11:35:04 PM
- 0 +

You don't have a LAN, but you connect directly to a DSL or cable modem. Is that correct?

Reply to GhislainG
wordplay   04-15-2009 at 12:10:19 AM
- 0 +

No. I'm using LAN bacle to connect to modem to pc.

Message quoted 1 times
Reply to wordplay
Bronze Motherboards badge GhislainG   04-15-2009 at 03:25:59 AM
- 0 +

wordplay wrote :

No. I'm using LAN bacle to connect to modem to pc.

You get a dynamic IP address from your router/modem or your ISP. If you switch off the modem by accident and lose your connection, you can run the following commands to get a new IP address:

ipconfig /release
ipconfig /renew

Reply to GhislainG
Bronze Motherboards badge GhislainG   04-15-2009 at 01:33:17 PM
- 0 +

It looks like you have a defective motherboard.

Reply to GhislainG
wordplay   04-15-2009 at 04:45:02 PM
- 0 +

So have to change the motherboard?

Reply to wordplay
Bronze Motherboards badge GhislainG   04-15-2009 at 06:30:38 PM
- 0 +

It's somewhat difficult to understand your issues. Can you perform the following tests:

Connect your modem to one LAN port, reboot your PC and perform the ipconfig commands that I suggested. Do you have access to the Internet?

Connect your modem to the other LAN port and perform the ipconfig commands that I suggested. Do you have access to the Internet?

About your DVD booting issue, stop the system. Then power up and try to boot from teh DVD. Does that work?

Reply to GhislainG
wordplay   04-16-2009 at 12:24:00 AM
- 0 +

I can't go to window. Either safe mode.

when I insert the Vista DVD into the computer and restart it, there is no "press any key to boot from the DVD" appear.

Reply to wordplay
Bronze Motherboards badge GhislainG   04-16-2009 at 02:00:34 AM
- 0 +

Quote :

I can't go to window. Either safe mode.

What do you mean? The PC no longer boots from the hard disk or any other device?

Quote :

when I insert the Vista DVD into the computer and restart it, there is no "press any key to boot from the DVD" appear.

Is your Vista DVD bootable? Did you test it in another PC to verify that it boots from it as expected? I've seen that CD/DVD issue before, but it was usually caused by a defective unit, bad media or the CD/DVD unit wasn't selected before the hard disk in the list of bootable devices. Is the DVD listed before the hard disk? If you press F12 at POST and select the DVD, does it boot from it?

If you are sure that you accurately described your problems and that everything is configured properly, then RMA the motherboard.

Reply to GhislainG
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > Gigabyte Ep45-UD3P LAN problem.
Go to:

There are 1005 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.621 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
  • 01:00 bew1075k won the Uniformed badge
  • 01:00 Parasitic won the Uniformed badge
  • 01:00 X3no won the Uniformed badge
  • 01:00 Siq won the Uniformed badge
  • 01:00 wayspooled won the Uniformed badge
  • 01:00 chris62 won the Freshman badge
  • 01:00 Tattysnuc won the Freshman badge
  • 01:00 gamerk316 won the Freshman badge
  • 05:23 jsc won the Overclocking badge
  • 01:00 rolli59 won the Spy badge