Fan Control PWM + VR Controller Rated Voltage 12V Start Voltage 7V Operating Voltage 10.38V - 13.2V Rated Current 0.12A Input Power 1.44W
Dimension 120 x 128 x 161.1mm Heat Sink Material Copper Base / Aluminum Fins / 8 Heat Pipes Heat Pipes Dimensions 6mm
Fan Dimension (W / H / D) 120 x 120 x 25mm Fan Speed 800 - 1800RPM Fan Airflow 69.69CFM Air pressure (mmH2O) 2.94mm H2O Bearing Type Rifle Bearing Fan Life Expectancy 40,000hrs Fan Noise Level (dB-A) 17 - 21dBA Fan Speed Adjustment Install on PCI Slot Connector 4-pin
The Coolermaster's V8 logo was GONE IN 60 SECONDS!
manifold air intake hose made from plastic wire loom, heated and bent
More aboutcoolmaster silverstone ferrari theme
roughly 3/16" tall manifolds made from modeling clay
Next up, making 12, intake pipes!
My "worm chorus line" is starting to morph in to intake pipes. The next step is applying more clay to join them to the manifolds. From there, acrylic primer, then a coat of silver "manifold" colored paint, then off to mnpctech's master painter, Brad Galvin to have intricate details like the Ferrari text on the red covers painted.
The pipes will be smoothed over with another application of clay.
A little more sanding, and it's ready for paint details :thumb:
Hand painting the intakes has commenced. Using custom vinyl film stencil made on plotter for "Ferrari"