Mastor slave dvd led Tags: DVD Writers Dvd Led Monitor Storage Last response: June 13, 2010 11:14 PM in Storage Share gnbinkley June 10, 2010 2:20:35 AM Hello, Where in the led ribbon should the master or slave be set at. Is master at the end of ribbon or the beginning connection. I have two new dvd light scribe players as old one was not reading and copies were often not good all the way through. More about : mastor slave dvd led | E-mail me updates | Report abuse Register or log in to remove SR-71 Blackbird June 13, 2010 10:19:12 PM ITS on the drives in the back!Set it to cable select and it will set it up for you! | Report abuse Jonmor68 June 13, 2010 11:14:27 PM Typically the end one is primary and the middle is secondery and the drive jumpers set accordingly, otherwise as area51reopened said set both to cable select. | Report abuse Ask the community Publish Tom's Hardware>Forum>Storage>Mastor slave dvd led> Related ressources: ForumMaster or slave in led ribbon ForumMaster and slave drives. ForumPC won't boot RED L.E.D shows,no beeps,no signal on monitor ForumLaptop hard-drive LED constantly lit. ForumHDD LED stays on Forump4p800-e deluxe, hdd led always on ForumA8N32-SLI Deluxe CD/ DVD not auto detected in BIOS ForumIDE Hard Disk and DVD writer comes up as Not Installed in the BIOS ForumWeird DVD problem ForumDVD -RW Problem ForumPc will not boot when power supply from dvd drive used for new device ForumDVD Freezes up Forumdvd drive wont let my computer boot ForumHard Dive on Same Channel as DVD ForumP5AD2-E Deluxe HD and DVD burner conflicts ForumDVD burning always failing ForumBest SSD Of 2013, Which is it? ForumXP Not Displaying Slave HDD ForumSlave hard drive not seen in (My Computer) ForumSlave hard drive not recognized More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !