Removed JMicron RAID driver! Help
Last response: in Storage
I have an ASUS P5B (Intel P965 Series) Motherboard with 4 hard disks. Two were non-raid, two were in a mirrored RAID array. Accidentally, in the Add/Remove Programs dialog the JMicron Driver (for the RAID?) was removed. The system was restarted and I now get a blue screen; error 0x0000007B.
How do I get the drivers back into the system? Will I lost the Raid Array? Whatever happens, I cannot lose anything on those RAID drives, and re-installing the OS from scratch is something I'm trying to avoid. Is there a smart solution to this stupid problem?
PLEASE HELP!!
How do I get the drivers back into the system? Will I lost the Raid Array? Whatever happens, I cannot lose anything on those RAID drives, and re-installing the OS from scratch is something I'm trying to avoid. Is there a smart solution to this stupid problem?
PLEASE HELP!!
More about : removed jmicron raid driver
Related ressources:
- ForumHELP !! Does XP need a driver for normal Jmicron ?
- ForumHow to update jmicron
- ForumJMicron 36X on Gigabyte DQ6 (v3) ... RAID instability. Help Please.
- ForumIntel ICH9R Southbridge or JMicron JMB363 for RAID 1
- ForumRAID newbie, JMicron or Nvidia, which do i use?
- ForumJMicron IDE Raid Controller Problem
- ForumJMicron ® JMB362 controller
- ForumJMicron & TRIM Questions
- ForumIS THERE ANY HELP OUT THERE !!!!! (P5W DH, IDE, JMICRON )
- ForumUpdate jmicron add on card bios
- ForumJMicron JMB363 card, AHCI
- ForumJMICRON driver needed? Not using raid array
- ForumHow to undo RAID on a JMicron JMB322 controller
- ForumNvidia raid drivers or jmicron raid drivers?
- ForumSSD swap for Avatar 145A2 Ultrabook?
- ForumRaid 0 questions (short stroking and striping)
- ForumRaid 0
- ForumA drive in raid 0 volume is failing.
- ForumRAID 1
- ForumSsd or raid 0 ?
- More resources
Read discussions in other Storage categories
!
