Whats the differance bweeen the 1090t and the 1055t

[jumbocrab]

So whats the differance between the 1055t and the 1090t besides the unlocked multiplier in the 1090t. Will the 1090t always overclock further than the 1055t? If it consistantly can, than has there been a chart made of some sort that shows if its worth the extra hundred dollars or so for that overclocking headroom?

 

[arterius2]

lets see... both being 125W TDP
1090T is base clocked at 3.2ghz + unlocked multipliers
1055T is base clocked at 2.8ghz

1090T has 400mhz lead over the 1055T right off the bat, and we're not even counting the effect of multipliers yet.

doesn't take a genius to figure out that 1090T will overclock consistantly over the 1055T.
my 1090T runs stable air-cooled at 4.3ghz, - until someone with a 1055T that can do better (on air)- this case is closed

 

[darksmart]

lets see... both being 125W TDP
1090T is base clocked at 3.2ghz + unlocked multipliers
1055T is base clocked at 2.8ghz

1090T has 400mhz lead over the 1055T right off the bat, and we're not even counting the effect of multipliers yet.

doesn't take a genius to figure out that 1090T will overclock consistantly over the 1055T.
my 1090T runs stable air-cooled at 4.3ghz, - until someone with a 1055T that can do better (on air)- this case is closed

and what about the turbo core speed?do they perform similar after overclocking 1055t to speed of 1090t? and how about your overclocked at 4.3Ghz performs in turbocore speed?

 

[darksmart]

Took me 5 minutes to get a 1055T stable at 4.2Ghz on a Biostar 890FX board with a Mega Shadow.

1055T is the way to go. 1090T is for noobs who can't overclock via fsb

wow.so are those results achievable on a 785 chipset ?i am having biostar ta785ge 128 motherboard.i am confused between 1055t and 1090t.also i am a noob in OC'ing

 

[darksmart]

Dark,

I can't guarantee you'll hit 4Ghz but 3.6-3.8Ghz should be attainable with your 785G at the min.

and what about the turbocore speed when cpu OC'd at 3.6-3.8GHz.

 

[darksmart]

means i will be left with 3.6-3.8Ghz on all 6 cores with turbo core disabled on such clock speeds?

 

[darksmart]

Yes. You could leave turbo on so it would cycle up to 4Ghz but i've never dabbled with it. I went straight for max overclocking

Thanks PsychoSaysDie.thank u very much.