Temperature readings Tags: Heatsinks Heat Temperature Processors Overclocking Last response: May 24, 2010 12:18 AM in Overclocking Share wikedsuny84 May 21, 2010 4:43:53 PM Hello, i overclocked my e7500 processor and the temperature was going upto 63 c. is it ok or shud i change my heat sink More about : temperature readings | E-mail me updates | Report abuse Register or log in to remove Lmeow Overclocking Expert May 21, 2010 11:48:09 PM 63°C is ok, the max thermal limit recommended by Intel is 74.1°C, but you do not want to go past 65°C. (Full load using Prime 95) | Report abuse i4yue May 22, 2010 9:57:07 AM what did you overclock to? if you overclocked from 2.9 to like 3.8 then those temps should be fine but if you overclocked from like 2.9 to like 3.1 thennnn theres something wrong | Report abuse cowgod2007 May 24, 2010 12:18:38 AM Thats a little bit on the hot side, but not too bad. | Report abuse Register or log in to remove Ask the community Publish Tom's Hardware>Forum>Overclocking>Temperature readings> Related ressources: ForumStrange temperature readings ForumTemperature Readings ForumWrong temperature readings ? ForumI3 2120 stock cooler ideal temperature readings ? ForumTemperature readings ForumClick here if your system won't boot or there is no video output ForumHomebrew Template ForumConfused about Temperature readings ForumSome odd temperature readings [XFX 5770] ForumConfusing temperature readings from GA-880GM-UD2H ForumOC G0 Q6600 to 3.2GHz - Temperature readings (+some more questions) ForumReally hot intel core i7 temperature readings ForumAre these temperature readings correct? ForumP5KC Speedfan Temperature Readings ? ForumCPU fan clicking? ForumWeird temperature readings... ForumInconsistent temperature readings ForumTemperature readings ForumDoubtful temperature readings on M0 stepping E2180 ForumGetting Proper Temperature Readings on Core 2 Duo? More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !