"Overclocking" Hyper Transport on mobo and CPU
Last response: in Overclocking
Hey guys, my motherboard claims to have a Hyper Transport capability on my motherboard of 2600Mhz, and my CPU of up to 4000Mhz. I am rather new to overclocking, but I went into my bios, saw that both of which were running at 2000Mhz, so I tried to put it at the stock rating that my motherboard claims to have, which is 2600, and I did the same to the CPU. I tried to reboot and it wouldn't post. So I reset the CMOS, and got things back to normal, but I'm curious to know if anyone here knows why it wouldn't boot on the regular setting that it's been listed at?
Am I doing something wrong?
Am I doing something wrong?
More about : overclocking hyper transport mobo cpu
Related ressources:
- Forum4000Mhz Hyper Transport MoBo
- ForumTwo 6870s with Hyper Transport Error
- ForumHyper Flood Transport Sync Error HELP D:
- ForumHELP!!! PC doesn't start after raising Hyper-Transport Bus frequency
- ForumHyper Transport Sync Flood Error problem still continues
- ForumHyper Transport Sync Flood Error
- ForumHyper Transport Speed combatibility with a Mobo ?
- ForumA8N-SLI Overclocking Hyper Transport settings? Othe Advice..
- ForumHyper Transport Flood Error
- ForumHyper Flood Transport Sync Error
- ForumComputer resets after post hyper transport sync flood error
- ForumMSI-770 showing Hyper Transport Sync Flood Error
- ForumWhat is hyper transport ?
- ForumHyper Transport Error and Graphic Kernal Crashes
- ForumHyper Transport Sync Flood Error
- ForumCrossfire HD7870 x8 questions?
- ForumHelp Overclocking an Athlon II X4 635 Setup
- ForumNeed a Core i7 Overclocking Guide
- ForumOverclocking Intel Celeron 2.4GHz
- ForumWhat is the point in locked CPU cores?
- More resources
Read discussions in other Overclocking categories
!
