Tom's Hardware > Forum > Motherboards & Memory > Asus > P6T Deluxe V2 with Kingston HyperX DDR3 1600MHz

P6T Deluxe V2 with Kingston HyperX DDR3 1600MHz

Forum Motherboards & Memory : Asus - P6T Deluxe V2 with Kingston HyperX DDR3 1600MHz

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Haxxin   05-08-2009 at 12:01:07 AM

hi, i have bought P6T Deluxe V2 motherboad and 3x1 GB kingston hyperX DDR3 1600MHz ram 9-9-9-27.
when i turn on the computer with all 3 rams in the pc it only shows black screen. But when i take one of the ram out, the pc works with no problems.
What is Wrong??
is it the wrong rams to the motherboard or is it the motherboard there is defective??

thanks for help

Message quoted 1 times
Add a reply
Sponsored Links
Register or log in to remove.
zendax   05-08-2009 at 05:27:47 AM
- 0 +

Haxxin wrote :

hi, i have bought P6T Deluxe V2 motherboad and 3x1 GB kingston hyperX DDR3 1600MHz ram 9-9-9-27.
when i turn on the computer with all 3 rams in the pc it only shows black screen. But when i take one of the ram out, the pc works with no problems.
What is Wrong??
is it the wrong rams to the motherboard or is it the motherboard there is defective??

thanks for help




Try turning on the computer with two sticks in the same configuration they are in now, but replace one of the sticks with the third stick you took out previously. If it boots, it may be a motherboard issue.

If you put that other stick in (again, in just a two stick configuration) and it doesn't boot, it's bad RAM. Try booting with just one stick with each of the three sticks individually. If it works with all three, either the motherboard is bad or you have a poorly matched set of RAM (one of the sticks isn't performing up to standards).

Reply to zendax
Haxxin   05-08-2009 at 11:46:08 AM
- 0 +

i have tried that and all rams works just fine when only two of them is in the computer.
could the problem be that the rams running with the wrong voltage?

Reply to Haxxin
Azpen30   05-08-2009 at 10:05:22 PM
- 0 +

I had the same issue with my first board , one of the ram slots was bad i would just go ahead and RMA the board

Reply to Azpen30
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > Asus > P6T Deluxe V2 with Kingston HyperX DDR3 1600MHz
Go to:

There are 1235 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.677 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them