Sign in with
Sign up | Sign in
Your question

No picture without HDMI [Intel DG45FC]

Last response: in Motherboards
Share
May 11, 2009 10:50:32 AM

I just installed a intel dg45fc motherboard in a mini-itx aopen s-12a chassi.
The other components:
Intel E2200 CPU
Corsair TWIN2X PC6400 DDR2 2GB KIT CL5 memory
Picopsu 90 90 Watt
Samsung SpinPoint MP2 HM201JJ 200GB 7200rpm 8MB 2.5" SATA


I facing some problems when using the DVI socket. I must have a hdmi cabel connected to the motherboard to have picture over dvi on my LCD TV. If I remove the HDMI cabel I get ouf of range on the LCD TV...
This is only when I reach the operating system (I use Windows Vista 64bit).

Strange because I ain't over the hdmi channel on the LCD TV.

Another problem that I have if I activate dual core in the bios the OS won't boot. After BIOS a dos prompt come up and there it stops... I have to use single core...
May 11, 2009 1:07:43 PM

Do you have a DVI to HDMI cable? Is the DVI port on the system board or display?
May 11, 2009 1:18:08 PM

baddad said:
Do you have a DVI to HDMI cable? Is the DVI port on the system board or display?


The DVI port is on the system board.
http://store.mo-co-so.com/images/back.jpg

I have ordered a DVI to HDMI cable, maybe it's work with that.

It's maybe a driver question. When I boot up in safe mode it's working.
I'll check it out when I come home which driver that is currently installed.

Maybe I should use this one?
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&...*%2064&lang=eng
May 15, 2009 7:45:43 AM

baddad said:
Do you have a DVI to HDMI cable? Is the DVI port on the system board or display?


Update:

I got my DVI - HDMI cabel yesterday. Works with that but it's the same thing as hdmi - hdmi.

Picture get very high res and if I run in 1950x1080 The picture position is out of the LCD screen If I pull down the res the picture got to small for the lcd screen.

Any ideas?

I Really don't like the VGA with dvi splitter. The quality is very poor.
!