I have a ASUS P5N-E SLI motherboard, which only has one USB header on it. For now, I've been using that with the front USB ports on my case. I have just added a multi memory card reader which fits in a floppy bay and also uses the USB header. it has a passthrough USB port, but because it's in a drive bay, it sits behind the case door, where as the other USB ports are always exposed (it's an antec P182 in case you're wondering).
is there such a thing as a splitter or Y-cable that will allow connecting two USB sets of ports to one motherboard header? or is there another USB header on the P5N-E board that i'm missing?
Before we get ahead of ourselves, have you read your motherboard's manual? AFAIK, the P5N-E has more than one USB header; maybe the manual will tell you where to locate them.
Page 9 of this manual (http://dlsvr04.asus.com/pub/ASUS/mb/socket775/P5N-E%20SLI/E2968P5N-ESLI.pdf) shows USB ports 5&6 are on a header located near the front panel header and ports 7&8 on another header located between the two PCI slots.
you are correct sir. i honestly don't see how i missed that.
at least in the system, as it's between my video card and scsi card.
not sure how i missed it in the manual.
i'm off to crack open my case and hook it up.
Thanks all!!!
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.