Sign in with
Sign up | Sign in
Your question

Asus 4850 problem

Last response: in Graphics & Displays
Share
January 27, 2009 12:58:00 PM

Hi
I got a problem i need help with. The 4850 i just install is getting nothing to the monitor. No signal.
I changed pci slots to see if that would help. But nothing. Any ideas? Or did i get a bad card.

More about : asus 4850 problem

a c 147 U Graphics card
a b C Monitor
January 27, 2009 1:48:09 PM

Is the PCI-E power connector plugged in? *sorry dumb questions, but it happens*
a c 147 U Graphics card
a b C Monitor
January 27, 2009 1:48:33 PM

What OS are you running to what monitor? Try a VGA cable if possible.
Related resources
January 27, 2009 2:20:53 PM

Yup power connector is in. Can't install anything until i can see something. Os included. I should add. There are two red leds lite at the bottom of the card.
Beats me if this means anything.
January 27, 2009 3:24:46 PM

if the red LED's are on that means the cards power isn't connected properly.
January 27, 2009 3:51:13 PM

waaw, do gpu's have lights?
!