Tom's Hardware > Forum > Motherboards & Memory > Memory > NForce 650i Giving Me Memory Headaches

NForce 650i Giving Me Memory Headaches

Forum Motherboards & Memory : Memory - NForce 650i Giving Me Memory Headaches

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I'm running a ABIT Fatal1ty FP-IN9 SLI motherboard. The problem is that if I put memory in 3 slots (any configuration) Windows won't start. It simply shows the Starting Windows screen and then reboots. (All sticks have passed memtest86+ individually and I've also tested slots 1/3 and 2/4 being filled.)

If I put memory in 4 slots the system won't boot. I just get a very loud beep that lasts until I restart. Again... this happens if I put in 4x2gb or 4x1gb or a mixture of the two.

I've tried increase the voltage.... went all the way to 2.20 and did not notice a difference.

BIOS has been upgraded to the latest.

Any ideas?

Add a reply

You might try to increase the NB voltage, or SPP voltage.

Other than that, you likely have incompatible memory modules for your motherboard.

Reply to flyin15sec

Ask the community Add a reply

Tom's Hardware > Forum > Motherboards & Memory > Memory > NForce 650i Giving Me Memory Headaches

Go to:

Help |
Forum rules

There are 1258 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.312 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Focus On

NForce 650i Giving Me Memory Headaches

Forum Motherboards & Memory : Memory - NForce 650i Giving Me Memory Headaches

Please mind