Scsi drive installation IBM X-series226-8648-2bu

Hi I am new in SCSI installation. .....Need some help for the installation....


During POST there is an error, 1801 no room for PCI option ROM, pci mass storage controller in slot 4 bus 04 device 01 function 00

1962 operating system not found ( Haven't instal yet)
19990301 Invalid boot rec ord on Hard disk.

____________________________________________________________

When I try to install Windows, after it load the files, it stopped saying setup did not find any hard disk drive installed in your computer. Make sure any hard disk drives are power on and properly connected..........bla....bla
____________________________________________________________

I have checked everything, don't know which one Istill miss....
I put the
HD#1 in bay 9........SCSI ID#1,
HD#2 in bay 8........SCSI ID#2,
HD#3 in bay 7........SCSI ID#3,
HD#4.....in bay 6....SCSI ID#4

In CTL + A (SCSI Utility controller....it found the Harddrive)...........


Please help

Thank you so much.................
2 answers Last reply
More about scsi drive installation series226 8648
  1. Did you read the 26k9207.txt file at https://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-55472&brandind=5000008? You need to follow the installation instructions provided in that file. Basically you need to download the drivers and press F6 to read the drivers diskette, etc.
  2. GhislainG said:
    Did you read the 26k9207.txt file at https://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-55472&brandind=5000008? You need to follow the installation instructions provided in that file. Basically you need to download the drivers and press F6 to read the drivers diskette, etc.


    >>>THX let me try it
Ask a new question

Read More

Hard Drives SCSI Storage