/ Sign-up
Your question

Help w/ Raid0 and SSD

  • New Build
  • NAS / RAID
  • SSD
  • Systems
Last response: in Systems
January 6, 2009 12:51:27 AM

I planed using 4 30gb OCZ ssd drives in Raid 0 on my mobo EVGA 132-BL-E758-A1 LGA 1366 Intel X58. Can someone confirm whether this is possible on this board? Please help. I'm mid build and i think I can only have 2 drives in Raid with this mobo. Am i missing something? I'm not using a Raid card fyi.

More about : raid0 ssd

January 6, 2009 1:25:20 AM

ICH10R supports a lot more than 2 drives in RAID0, so 4 drives won't be an issue.
January 6, 2009 1:42:53 AM the manual it says that only 2 ports support Raid
Related resources
Can't find your answer ? Ask !
January 6, 2009 2:19:19 AM

does it matter which sata ports i use?
January 6, 2009 3:13:45 AM

also....will i have to have a floppy drive?
January 6, 2009 11:34:44 AM

You have to use the SATA ports connected to the ICH10R (most likely the black ones). The limit of 2 drives might apply to the red SATA ports. You don't need a floppy.