Hello
I have a problem with system
I have recently bought 2 new memory dims, same brand and model than the ones I had before, OCZ Gold 800mhz 2x1GB. But the new ones were a little different. However using 3 dims the system works fine but when I put on the fourth one the pc becomes slow and unresponsive.
MSI P6N SLI
C2D 6550
2x9600gt 512MB
Samsung 250 GB
WD 500 GB
OLD:
Manufacturer : OCZ
Part Number : OCZ2G8001G Serial Number : Unspecified
Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800]
Format : Regular UDIMM (133,35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Supported Frequencies : 266 MHz, 333 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @266 MHz, 4 clocks @333 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz RAS Precharge (tRP) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 10 clocks @266 MHz, 13 clocks @333 MHz, 15 clocks @400 MHz
Min TRC : 15 clocks @266 MHz, 19 clocks @333 MHz, 23 clocks @400 MHz
NEW:
Manufacturer : OCZ
Part Number : OCZ2G8001G Serial Number : Unspecified Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800] Format : Regular UDIMM (133,35 x 3) Size : 1024 MB (1 ranks, 8 banks) Module Buffered : No Module Registered : No
Module SLi Ready (EPP) : No Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : 2000
Supported Frequencies : 266 MHz, 333 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @266 MHz, 4 clocks @333 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
RAS Precharge (tRP) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 10 clocks @266 MHz, 13 clocks @333 MHz, 15 clocks @400 MHz
Min TRC : 16 clocks @266 MHz, 20 clocks @333 MHz, 24 clocks @400 MHz
Can anyone please help me?
Thanks!
I have a problem with system
I have recently bought 2 new memory dims, same brand and model than the ones I had before, OCZ Gold 800mhz 2x1GB. But the new ones were a little different. However using 3 dims the system works fine but when I put on the fourth one the pc becomes slow and unresponsive.
MSI P6N SLI
C2D 6550
2x9600gt 512MB
Samsung 250 GB
WD 500 GB
OLD:
Manufacturer : OCZ
Part Number : OCZ2G8001G Serial Number : Unspecified
Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800]
Format : Regular UDIMM (133,35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Supported Frequencies : 266 MHz, 333 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @266 MHz, 4 clocks @333 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz RAS Precharge (tRP) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 10 clocks @266 MHz, 13 clocks @333 MHz, 15 clocks @400 MHz
Min TRC : 15 clocks @266 MHz, 19 clocks @333 MHz, 23 clocks @400 MHz
NEW:
Manufacturer : OCZ
Part Number : OCZ2G8001G Serial Number : Unspecified Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800] Format : Regular UDIMM (133,35 x 3) Size : 1024 MB (1 ranks, 8 banks) Module Buffered : No Module Registered : No
Module SLi Ready (EPP) : No Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : 2000
Supported Frequencies : 266 MHz, 333 MHz, 400 MHz
CAS Latency (tCL) : 3 clocks @266 MHz, 4 clocks @333 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
RAS Precharge (tRP) : 4 clocks @266 MHz, 5 clocks @333 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 10 clocks @266 MHz, 13 clocks @333 MHz, 15 clocks @400 MHz
Min TRC : 16 clocks @266 MHz, 20 clocks @333 MHz, 24 clocks @400 MHz
Can anyone please help me?
Thanks!