When hot is way to hot!!!

Hello to all out there!!!

I bit new to the IT world so don't hold it against me.
Just have a few questions if someone can lend a hand.

1. Hot NB and SB using house fan to keep cool at idle. (room temp is 75deg F)

2. Sparkle vid card is boiling hot not sure if i am doing something wrong but it is way to hot.

3. I would like to be able to set my bios with stable settings and get it right but not way overclocked.

Here are my specs if someone can help it would be greatly appreciated. Just want to thank everyone out there that has been posting answers to those in need of assistance i have read alot of forums and the help is AWESOME!!!

Specification AMD Phenom(tm) II X4 810 Processor
Package Socket AM2+ (940)
CPUID F.4.2
Extended CPUID 10.4
Brand ID 16
Core Stepping RB-C2
Technology 45 nm
Core Speed 2665.1 MHz (13.0 x 205.0 MHz)
HT Link speed 2050.1 MHz
Stock frequency 2600 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
L1 Data cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 4 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache 4 MBytes, 64-way set associative, 64-byte line size
FID/VID Control yes
FID range 5.0x - 13.0x
max VID 1.325 V
Features XD, VT
Package Type 0x1
Model 10
String 1 0x4
String 2 0x6
Page 0x0

Northbridge AMD 790GX rev. 00
Southbridge ATI SB750 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x8
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 8192 MBytes
Channels Dual (Ganged)
Memory Frequency 683.4 MHz (3:10)
CAS# 9.0
RAS# to CAS# 9
RAS# Precharge 9
Cycle Time (tRAS) 24
Bank Cycle Time (tRC) 31
Command Rate 2T
NB Frequency 2050.1 M

All four are the same:

Memory type DDR3
Module format UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number F3-10666CL8-2GBHK

Attributes
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes

Timings table
Frequency (MHz) 444 519 593 667
CAS# 6.0 7.0 8.0 9.0
RAS# to CAS# delay 6 8 9 10
RAS# Precharge 6 8 9 10
TRAS 16 19 22 25
TRC 22 26 30 34

XMP revision 1.0

XMP profile XMP-1334
Specification PC3-10700
Voltage level 1.600 Volts
Min Cycle time 1.500 ns (667 MHz)
Min tRP 11.00 ns
Min tRCD 11.00 ns
Min tWR 15.00 ns
Min tRAS 31.25 ns
Min tRC 45.00 ns
Min tRFC 90.00 ns
Min tRTP 7.50 ns
Min tRRD 6.00 ns
Command Rate 2T

Timings table
Frequency (MHz) 727
CAS# 8.0
RAS# to CAS# delay 8
RAS# Precharge 8
TRAS 23
TRC 33

Mainboard Model LP JR 790GX-M3H5 (0x3E1 - 0x124992A8)

LPCIO
-----------------------------------------------------
Vendor ITE
Model IT8716
Vendor ID 0x90
Chip ID 0x8716
Revision ID 0x3
Config Mode I/O address 0x2E

Dump config mode register space, LDN = 0x4
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 87 16 03 10 00 C0 8F 20 02 00 80 00 07 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 02 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00


Hardware monitor
-----------------------------------------------------

ITE IT87 hardware monitor

Voltage sensor 0 1.49 Volts [0x5D] (CPU VCORE)
Voltage sensor 1 1.22 Volts [0x4C] (VIN1)
Voltage sensor 2 3.36 Volts [0xD2] (+3.3V)
Voltage sensor 3 5.00 Volts [0xBA] (+5V)
Voltage sensor 4 12.35 Volts [0xC1] (+12V)
Voltage sensor 5 -4.74 Volts [0x4A] (-12V)
Voltage sensor 6 -6.34 Volts [0x63] (-5V)
Voltage sensor 7 4.92 Volts [0xB7] (+5V VCCH)
Voltage sensor 8 3.38 Volts [0xD3] (VBAT)
Temperature sensor 0 42°C (107°F) [0x2A] (TMPIN0)
Temperature sensor 1 33°C (91°F) [0x21] (TMPIN1)
Temperature sensor 2 46°C (114°F) [0x2E] (TMPIN2)
Fan sensor 0 2296 RPM [0x126] (FANIN0)
Fan sensor 1 1619 RPM [0x1A1] (FANIN1)
Fan sensor 2 1527 RPM [0x1BA] (FANIN2)

GeForce 9800 GT hardware monitor

Temperature sensor 0 50°C (121°F) [0x32] (GPU Core)

Dump hardware monitor



PCI Device List
------------------------------------------------------------------------------

Host Bridge
bus 0 (0x00), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1022
Model ID 0x9600
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x06
Cache Line 0x00
Latency 0x40
Header 0x00
PCI header
Address 3 (memory) 0xE0000000
Subvendor ID 0x1022
Subsystem ID 0x9600
Int. Line 0x00
Int. Pin 0x00
Capabilities
HyperTransport Capability
Offset C4h
Revision 3.00
Interface type Slave/Primary
Link 0 width (in/out) 16 bits/16 bits
Link 0 frequency 2000MHz
Link 1 width (in/out) 8 bits/8 bits
Link 1 frequency 200MHz
HyperTransport Capability
Offset 54h
Interface type Clumping
HyperTransport Capability
Offset 40h
Interface type Retry Mode
HyperTransport Capability
Offset 9Ch
Interface type Gen3
HyperTransport Capability
Offset F8h

Not sure what else would be needed to help with my delema....Please let me know if there is anything else.

Thanks!!!

The only temps I see in your data are these:

Temperature sensor 0 42°C (107°F) [0x2A] (TMPIN0)
Temperature sensor 1 33°C (91°F) [0x21] (TMPIN1)
Temperature sensor 2 46°C (114°F) [0x2E] (TMPIN2)

Temperature sensor 0 50°C (121°F) [0x32] (GPU Core)

Those temps don't look 'too hot" at all. What am I missing?

Hello to all out there!!!

I bit new to the IT world so don't hold it against me.
Just have a few questions if someone can lend a hand.

1. Hot NB and SB using house fan to keep cool at idle. (room temp is 75deg F)

2. Sparkle vid card is boiling hot not sure if i am doing something wrong but it is way to hot.

3. I would like to be able to set my bios with stable settings and get it right but not way overclocked.

Here are my specs if someone can help it would be greatly appreciated. Just want to thank everyone out there that has been posting answers to those in need of assistance i have read alot of forums and the help is AWESOME!!!

Specification AMD Phenom(tm) II X4 810 Processor
Package Socket AM2+ (940)
CPUID F.4.2
Extended CPUID 10.4
Brand ID 16
Core Stepping RB-C2
Technology 45 nm
Core Speed 2665.1 MHz (13.0 x 205.0 MHz)
HT Link speed 2050.1 MHz
Stock frequency 2600 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
L1 Data cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 4 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache 4 MBytes, 64-way set associative, 64-byte line size
FID/VID Control yes
FID range 5.0x - 13.0x
max VID 1.325 V
Features XD, VT
Package Type 0x1
Model 10
String 1 0x4
String 2 0x6
Page 0x0

Northbridge AMD 790GX rev. 00
Southbridge ATI SB750 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x8
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 8192 MBytes
Channels Dual (Ganged)
Memory Frequency 683.4 MHz (3:10)
CAS# 9.0
RAS# to CAS# 9
RAS# Precharge 9
Cycle Time (tRAS) 24
Bank Cycle Time (tRC) 31
Command Rate 2T
NB Frequency 2050.1 M

All four are the same:

Memory type DDR3
Module format UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD000000)
Size 2048 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number F3-10666CL8-2GBHK

Attributes
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes

Timings table
Frequency (MHz) 444 519 593 667
CAS# 6.0 7.0 8.0 9.0
RAS# to CAS# delay 6 8 9 10
RAS# Precharge 6 8 9 10
TRAS 16 19 22 25
TRC 22 26 30 34

XMP revision 1.0

XMP profile XMP-1334
Specification PC3-10700
Voltage level 1.600 Volts
Min Cycle time 1.500 ns (667 MHz)
Min tRP 11.00 ns
Min tRCD 11.00 ns
Min tWR 15.00 ns
Min tRAS 31.25 ns
Min tRC 45.00 ns
Min tRFC 90.00 ns
Min tRTP 7.50 ns
Min tRRD 6.00 ns
Command Rate 2T

Timings table
Frequency (MHz) 727
CAS# 8.0
RAS# to CAS# delay 8
RAS# Precharge 8
TRAS 23
TRC 33

Mainboard Model LP JR 790GX-M3H5 (0x3E1 - 0x124992A8)

LPCIO
-----------------------------------------------------
Vendor ITE
Model IT8716
Vendor ID 0x90
Chip ID 0x8716
Revision ID 0x3
Config Mode I/O address 0x2E

Dump config mode register space, LDN = 0x4
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 87 16 03 10 00 C0 8F 20 02 00 80 00 07 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 02 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00


Hardware monitor
-----------------------------------------------------

ITE IT87 hardware monitor

Voltage sensor 0 1.49 Volts [0x5D] (CPU VCORE)
Voltage sensor 1 1.22 Volts [0x4C] (VIN1)
Voltage sensor 2 3.36 Volts [0xD2] (+3.3V)
Voltage sensor 3 5.00 Volts [0xBA] (+5V)
Voltage sensor 4 12.35 Volts [0xC1] (+12V)
Voltage sensor 5 -4.74 Volts [0x4A] (-12V)
Voltage sensor 6 -6.34 Volts [0x63] (-5V)
Voltage sensor 7 4.92 Volts [0xB7] (+5V VCCH)
Voltage sensor 8 3.38 Volts [0xD3] (VBAT)
Temperature sensor 0 42°C (107°F) [0x2A] (TMPIN0)
Temperature sensor 1 33°C (91°F) [0x21] (TMPIN1)
Temperature sensor 2 46°C (114°F) [0x2E] (TMPIN2)
Fan sensor 0 2296 RPM [0x126] (FANIN0)
Fan sensor 1 1619 RPM [0x1A1] (FANIN1)
Fan sensor 2 1527 RPM [0x1BA] (FANIN2)

GeForce 9800 GT hardware monitor

Temperature sensor 0 50°C (121°F) [0x32] (GPU Core)

Dump hardware monitor



PCI Device List
------------------------------------------------------------------------------

Host Bridge
bus 0 (0x00), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1022
Model ID 0x9600
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x06
Cache Line 0x00
Latency 0x40
Header 0x00
PCI header
Address 3 (memory) 0xE0000000
Subvendor ID 0x1022
Subsystem ID 0x9600
Int. Line 0x00
Int. Pin 0x00
Capabilities
HyperTransport Capability
Offset C4h
Revision 3.00
Interface type Slave/Primary
Link 0 width (in/out) 16 bits/16 bits
Link 0 frequency 2000MHz
Link 1 width (in/out) 8 bits/8 bits
Link 1 frequency 200MHz
HyperTransport Capability
Offset 54h
Interface type Clumping
HyperTransport Capability
Offset 40h
Interface type Retry Mode
HyperTransport Capability
Offset 9Ch
Interface type Gen3
HyperTransport Capability
Offset F8h

Not sure what else would be needed to help with my delema....Please let me know if there is anything else.

Thanks!!![/quotemsg]



OH ya the case/ case fans are as follow:

Open case (x-qpack ver 1)
1 x 120mm rear
1 x 80mm from
3 x 40mm hd bay slot

Power supply I also forgot is a OCZ ModXStream Pro / 600W

Reason for the lower temps is that the fan is right on it and lucky it doesn't blow away. LoL

Thanks guys wow you are on top of it...

starams5,

Thanks for the input....
I will get some better fans and adjust the CPU fan speed. I have a Shuriken ver. B on the CPU right now so i'll see what i can get out of it.

I also had a question about the amp draw? The manufacture does not state whether it allows drawing from the unused rail or not. Is that something I should be worried about with the video card needing supposable 26A and the PSU I have only provides 25A per rail. Also is there something I need to do in the BIOS settings to allow proper power/watts to it?

This is a great help i am glad you guys are out there, allows for good wisdom.

starams5,

Great advice and once again thanks a bunch for all your assistance.