Sign in with
Sign up | Sign in
Your question

Corsair H50 Installation

Last response: in Overclocking
Share
July 6, 2010 4:55:17 AM

I've ordered a Corsair H50 (Super pumped about it, no pun intended) but I can't figure out by looking at the picture where to plug it into the Motherboard.

I ordered a Gigabyte GA-890XA-UD3: On newegg Here

Can any experienced builder help me find out where i'll be plugging it in? I don't want to get building, and end up staring blankly at a bunch of Fan headers...
July 6, 2010 4:24:16 PM

"Plug the pump into the header by the PCIe slot"

That's it? How do i know if it's throttled by the Bios? Can i turn throttling off in the bios?
m
0
l
Related resources
a b V Motherboard
a b K Overclocking
July 6, 2010 11:10:37 PM

Trueno07 said:
"Plug the pump into the header by the PCIe slot"

That's it? How do i know if it's throttled by the Bios? Can i turn throttling off in the bios?


Look for the CPU fan header on the motherboard, you should see a small 4 pin header that says "CPU". The second connector (PUMP) can go on any of the other headers that you may have available.

How do you know if what's throttled? Just install the cooler and fire up the PC ;) 
m
0
l
July 7, 2010 4:06:27 AM

The pump requires that it have full power 100% of the time. The fan attached to the radiator can be throttled by the bios, but the pump can't be..

I found a few headers on the board (duh :p ) including the ones you were talkin' about. I guess i'll just plug it in and see what happens :D 

And thanks for the help, i appreciate it OvrClkr
m
0
l
a b V Motherboard
a b K Overclocking
July 7, 2010 4:24:46 AM

my pleasure buddy =)
m
0
l
!