This can oc how many ghz

[Guest]

Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E2180
Codename Conroe
Specification Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.F.D
Extended CPUID 6.F
Core Stepping M0
Technology 65 nm
Core Speed 1440.1 MHz
Multiplier x FSB 6.0 x 240.0 MHz
Rated Bus speed 960.1 MHz
Stock frequency 2000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 10.0x
Max VID 1.325 V

 

[Pyroflea]

Impossible to tell, there's too many variables for us to simply say "Chip X will overclock Y GHz". It depends on cooling, how much voltage you apply, the actual CPU itself (as every chip OC's differently), as well as a multitude of other things.

 

[Guest]

Northbridge Intel P45/P43 rev. A3
Southbridge Intel 82801JR (ICH10R) rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 399.0 MHz (2:3)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Row Refresh Cycle Time (tRFC) 36
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096

 

[Guest]

Hardware monitor ITE IT87
Voltage 0 1.31 Volts [0x52] (CPU VCORE)
Voltage 1 1.90 Volts [0x77] (VIN1)
Voltage 2 3.33 Volts [0xD0] (+3.3V)
Voltage 3 5.00 Volts [0xBA] (+5V)
Voltage 4 0.77 Volts [0xC] (+12V)
Voltage 7 5.08 Volts [0xBD] (+5V VCCH)
Voltage 8 3.20 Volts [0xC8] (VBAT)
Temperature 0 44°C (111°F) [0x2C] (TMPIN0)
Temperature 1 44°C (111°F) [0x2C] (TMPIN1)
Temperature 2 -1°C (28°F) [0xFE] (TMPIN2)
Fan 0 2143 RPM [0x13B] (FANIN0)
Fan 1 1006 RPM [0x29F] (FANIN1)
Fan 2 3245 RPM [0xD0] (FANIN2)
Fan 3 2027 RPM [0x14D] (FANIN3)
Register space LPC, base address = 0x0290

 

[Guest]

Hardware monitor Intel Pentium E2180
Temperature 0 45°C (112°F) [0x28] (Core #0)
Temperature 1 43°C (109°F) [0x2A] (Core #1)

Hardware monitor NVIDIA GeForce 8500 GT
Temperature 0 66°C (150°F) (GPU Core)

 

[Guest]

Had one of those chips for a few months in my GF machine, in Gigabyte G31 mobo clocked to 3.2ghz with Arctic Cooler Freezer 7 pro cooler!, but had nice 1066mhz ramm for it..

Most should get 2.6-8ghz but looking at your temps,you need better airflow in your case and replacing of the stock cooler before overclocking. (presuming they are idle temps of course)

 

[arthurh]

I agree both with Pyroflea and moricon. Good advise from both of them.

Try this link to see if it can help you.

Good luck to you.