I'm running a core i7 965 at stock speeds right now. I installed a rather large water cooling system that has only the cpu in the loop, but the cpu temperature idles at about 40 C according to Real Temp.
I'm running a MagiCool XTREME NOVA 1080 radiator (9 fans) and an RD-30 pump so I would figure the cpu should be much cooler. I've reseated the water block and reapplied thermal paste many times but I still arrive at this same temperature.
What am I doing wrong? Would air bubbles trapped in the radiator cause this much of a temperature spike? Thanks.
On load for p95 my temps spike up to about 80 C. The room temp is sorta cold, about 18 C I think. This worries me, could I have done something horribly wrong with the thermal paste?
Message edited by ixidorsiren on 04-19-2009 at 05:46:15 PM
Does anyone have any similar experience with this radiator? It seems like there must be something substantially wrong with how I have it setup to justify load temps in the 80s.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.