Overclock won't hold anymore [Fixed]

[whogie]

Hia. This morning when I went to wake my computer from sleep, it crashed. After turning it off and on again, I noticed my overclock was no longer there. I've been using the overclock for a while, but now, no matter what I set it to in the BIOS, it won't stick (even shows 9x333Mhz in POST.)

Here's a screenshot of the problem.

Hardware:
GA-P35-DS3L Rev 2 (newest BIOS)
Core 2 Duo E8400
Geforce 9800GTX
4GB 800Mhz DDR2

What could have happened?
Thank you.

 

[treefrog07]

I would CLR_CMOS, re-start, load Fail-Safe Defaults, save and exit. Then re-start and re-enter the BIOS to re-set your OC settings. If that doesn't work, you may need a new BIOS chip.

 

[treefrog07]

I would CLR_CMOS, re-start, load Fail-Safe Defaults, save and exit. Then re-start and re-enter the BIOS to re-set your OC settings. If that doesn't work, you may need a new BIOS chip.

 

[whogie]

Fixed!
Clearing the CMOS didn't work, but I reseated the RAM into different slots, and reseated the motherboard and CPU power cables. *shrug*