Help with setting my ram to propper settings...

k1ngkev1n1

Distinguished
Jun 27, 2010
247
0
18,680
So i have a i5 750 with the gigabyte P55A ud3 motherboard, a hyper 212 cooler, xfx 5770 and corsair 650 psu.

My ram is only showing up as 9-9-9 24 at 1333 and the ram is rated 7-8-7 24 at 1600 i tried to adjust the setting only to get to 1480 or 1850 there was no 1600 also the volz say 1.65 on newegg but on the manufacturer site says 1.6 there is no 1.65 option only 1.64 or 1.66 as well in the bios, so i just left the settings at auto until figure out how to adjust the proper way.
Here is my ram:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231303&cm_re=g.skill_4_gb-_-20-231-303-_-Product


I also just overclocked my cpu yesturday to 3.7 mhz nothing to crazy the voltz were at 1.36. temps stay around 65 when i run prime95 as well 100% cpu load. so temp seems fine as well. idle 30's

any help would be great.
 
Solution
hi mate

(M.I.T):ENTER
CPU HOST CONTROL:MANUAL
CUP FREQUENCY:160
CPU CLOCK RATIO:18
MEMORY CLOCK:1600mhz(2:10)
Dram configuration: enter
DDR timing item: manual
Cas:7
RTC:8
RPT:7
MRAT:24
dram timing mode:2n
CPU voltage control:1.2~1.3(if you o.c your CPU)
Dram voltage:1.64 or 1.66



autosax

Distinguished
Jul 16, 2010
14
0
18,520
hi mate

(M.I.T):ENTER
CPU HOST CONTROL:MANUAL
CUP FREQUENCY:160
CPU CLOCK RATIO:18
MEMORY CLOCK:1600mhz(2:10)
Dram configuration: enter
DDR timing item: manual
Cas:7
RTC:8
RPT:7
MRAT:24
dram timing mode:2n
CPU voltage control:1.2~1.3(if you o.c your CPU)
Dram voltage:1.64 or 1.66



 
Solution