I have a problem in populating ram with s5000xvn intel motherboard: when I use ranks a2, b2, c2, d2 -> ram chipset goes in single channel mode instead of quad (seen with benchs and everest) and I don't see why. I have followed instructions in motherboard documentation, populating slots with identical pairs on a1+b1 then c1+d1, next a2+b2, and c2+d2.
And there is no way:since a pair is in a2+b2 or a2+b2 & c2+d2, chipset goes in single mode.
Rams I have bought are 6x modules of 4gb ddr2 sold by pairs:
- 1 pair bought 6 months ago (kingston/quimonda kvr667d2d4f5k2/8g 5-5-5-15 / 20-43-3-5-3-3),
- 2 pairs bought a few days (kingston/elpida kvr667d2d4f5k2/8g 5-5-5-15 / 20-43-3-5-3-3)
(These rams are not reference tested by intel for this motherboard, but they work all fine, just this pb with channel mode with more than 4 slots busy).
Tests I have done:
a1&b1: quimonda + c1&d1: elpida -> quad channel / a1&b1: elpida + c1&d1: quimonda -> quad channel
a1&b1: quimonda + c1&d1: elpida + a2&b2: elpida -> single channel / a1&b1: elpida + c1&d1: quimonda + a2&b2: elpida -> single channel
a1&b1: quimonda + c1&d1: elpida + a2&b2: elpida + c2&d2: previous old rams -> single channel / a1&b1: elpida + c1&d1: quimonda + a2&b2: elpida + c2&d2: previous old rams -> single channel
EDIT: this is my config, I have tried to search pb over the net without success. I have tried intel support too, and for the moment their response is that ram I use was not tested by intel... + a link to a doc which doesn't help me more than doc I have already read...
Propriétés du processeur:
Type de processeur 2x DualCore Intel Xeon 5130, 2000 MHz (6 x 333)
Alias du processeur Woodcrest
Stepping du processeur B2
Jeu d'instructions x86, x86-64, MMX, SSE, SSE2, SSE3, SSSE3
Vitesse d'horloge originelle 2000 MHz
Min / Max du multiplicateur du CPU 6x / 6x
Multi CPU:
CPU #1 Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995 MHz
CPU #2 Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995 MHz
CPU #3 Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995 MHz
CPU #4 Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1995 MHz
Informations physiques:
Forme du composant 771 Contact LGA
Fabricant du processeur:
Nom de l'entreprise Intel Corporation
(CPUID) Propriétés:
(CPUID) Fabricant GenuineIntel
(CPUID) Nom du processeur Intel(R) Xeon(R) CPU 5130 @ 2.00GHz
(CPUID) Révision 000006F6h
(IA) Identifiant de la marque 00h (Inconnu)
Identifiant de la plate-forme 28h / MC 04h (LGA771 DP)
Révision du Microcode Update CD
Unités HTT / CMP 0 / 2
Température Tjmax 80 °C (176 °F)
--------[ Carte mère ]--------------------------------------------------------------------------------------------------
Propriétés de la carte mère:
Identifiant de la carte mère 63-0100-000001-00101111-092308-Chipset$0AAAA000_BIOS DATE: 09/23/08 12:19:37 VER: 08.00.10
Nom de la carte mère Intel Vernonia S5000XVN
Propriétés du bus principal:
Type du bus Intel AGTL+
Largeur du bus 64 bits
Horloge réelle 333 MHz (QDR)
Horloge effective 1333 MHz
Bande passante 10667 Mo/s
Propriétés du bus mémoire:
Type du bus Quad DDR2 SDRAM
Largeur du bus 256 bits
Ratio DRAM:FSB 1:1
Horloge réelle 333 MHz (DDR)
Horloge effective 667 MHz
Bande passante 21333 Mo/s
Informations physiques sur la carte mère:
Sockets/slots processeur 2 LGA771
Slots d'expansion 2 PCI-E x8, 1 PCI-E x16, 2 PCI-X
Slots RAM 8 FB-DIMM
Périphériques intégrés Audio, Dual LAN
Forme Extended ATX
Chipset de la carte mère i5000X
Mémoire physique:
Total 16357 Mo
Utilisé 4229 Mo
Disponible 12127 Mo
Utilisation 26 %
Zone de swap:
Total 15864 Mo
Utilisé 3477 Mo
Disponible 12386 Mo
Utilisation 22 %
Mémoire virtuelle:
Total 32221 Mo
Utilisé 7707 Mo
Disponible 24514 Mo
Utilisation 24 %
Physical Address Extension (PAE):
Supporté par le système d'exploitation Oui
Supporté par le processeur Oui
Active Oui
--------[ SPD ]---------------------------------------------------------------------------------------------------------
[ Channel0-DIMM1: Kingston KINGSTON ]
Propriétés du module mémoire:
Nom du module Kingston KINGSTON
Numéro de série 0918FFFFh (4294907913)
Date de fabrication Semaine 20 / 2009
Taille du module 4 Go (2 ranks, 8 banks)
Type du module FB-DIMM
Type de mémoire DDR2 SDRAM FB-DIMM
Vitesse de mémoire DDR2-667 (333 MHz)
Voltage du module 1.5 V / 1.8 V
Méthode de détection d'erreurs ECC
Taux de rafraîchissement Réduit (7.8 us)
Manufacturier DRAM Elpida
Propriétés du module mémoire:
Nom du module Kingston KINGSTON
Numéro de série 0118803Dh (1031804929)
Date de fabrication Semaine 20 / 2009
Taille du module 4 Go (2 ranks, 8 banks)
Type du module FB-DIMM
Type de mémoire DDR2 SDRAM FB-DIMM
Vitesse de mémoire DDR2-667 (333 MHz)
Voltage du module 1.5 V / 1.8 V
Méthode de détection d'erreurs ECC
Taux de rafraîchissement Réduit (7.8 us)
Manufacturier DRAM Elpida
Propriétés du module mémoire:
Nom du module Qimonda 72T512920EFA3SC
Numéro de série 07027616h (376832519)
Date de fabrication Semaine 32 / 2008
Taille du module 4 Go (2 ranks, 8 banks)
Type du module FB-DIMM
Type de mémoire DDR2 SDRAM FB-DIMM
Vitesse de mémoire DDR2-667 (333 MHz)
Voltage du module 1.5 V / 1.8 V
Méthode de détection d'erreurs ECC
Taux de rafraîchissement Réduit (7.8 us)
Manufacturier AMD Qimonda
Manufacturier DRAM Qimonda
Propriétés du module mémoire:
Nom du module Qimonda 72T512920EFA3SC
Numéro de série 0200C42Dh (767819778)
Date de fabrication Semaine 33 / 2008
Taille du module 4 Go (2 ranks, 8 banks)
Type du module FB-DIMM
Type de mémoire DDR2 SDRAM FB-DIMM
Vitesse de mémoire DDR2-667 (333 MHz)
Voltage du module 1.5 V / 1.8 V
Méthode de détection d'erreurs ECC
Taux de rafraîchissement Réduit (7.8 us)
Manufacturier AMD Qimonda
Manufacturier DRAM Qimonda
Propriétés du chipset North Bridge:
North Bridge Intel Greencreek 5000X
Plateforme Intel Glidewell
Vitesses FSB supportées FSB1066, FSB1333
Types de mémoire gérés DDR2-533 SDRAM, DDR2-667 SDRAM
Quantité maximum de mémoire 64 Go
Révision 31
Forme du composant 1432 Pin FC-BGA
My guess is that all 4 channels have to be populated the same to have quad channel mode work. That means either 4 total DIMMs (a1, b1, c1, d1) or 8 total DIMMs (a1, b1, c1, d1, a2, b2, c2, d2). You've only got 6 "new" DIMMs, so you can't setup the 2nd config, and quad-channel mode works fine in your 4-DIMM setup.
Plenty of typos and errors in the Intel manual, btw.
------------------------------e2160@3GHz: OCing my way to Ubuntuland!
Reply to Mondoman
You're probably right...
But I tried with 8 dimms (6x4GB + 2x2GB), do you think I could have better results with 4x4GB + 4x2GB (I have this rams in reserve) ? Or does it require 8x4GB ?