Solved

Getting ready to crossfire a 4890

im getting ready to crossfire a 4890 xoc - do you think my cpu would be bottle necked? (it's at 3gzh quad 1 terbit hard drive- with only 178 gigs used) 4 gigs or ram
9 answers Last reply Best Answer
More about getting ready crossfire 4890
  1. what is the cpu.
  2. Yeah what processor do you have?
  3. it's a amd phenome 2x4 940 black edition 3.0 ghz quad
  4. anyone home?
  5. Best answer
    You are fine. Get the second card. You could just do a mild overclock to 3.2ghz to eliminate a slight bottleneck.
  6. HansVonOhain said:
    You are fine. Get the second card. You could just do a mild overclock to 3.2ghz to eliminate a slight bottleneck.
    do you know how t over clck this chip, can you give me #'s
  7. hecjr82 said:
    do you know how t over clck this chip, can you give me #'s


    What motherboard do you have?

    Start with this guide, you can ask questions later ;)

    http://www.tomshardware.com/forum/258573-29-black-edition-overclock-guide
  8. I think you would be a little limited at stock speeds so you may want to look into overclocking your CPU. Also, make sure your motherboard has 2 16x slots or 2 8x slots. Using something like a 16x/4x setup will certainly affect performance. In some games the effect is alot worse than others.
  9. Best answer selected by hecjr82.
Ask a new question

Read More

CPUs Hard Drives Crossfire Overclocking