Tom's Hardware > Forum > Motherboards & Memory > Memory > Are these setting Correct for DDR2 800

Are these setting Correct for DDR2 800

Forum Motherboards & Memory : Memory - Are these setting Correct for DDR2 800

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Kenster1025   07-28-2009 at 04:43:05 AM

I am just here to get a confirmation, that I correctly set my DDR 800 to run at 400 MHz. Also I am new to the forum's and glad to have joined, or well remembered that I had an account.

So are these settings correct?
http://i19.photobucket.com/albums/b155/COOLKID185/NewPicture10.jpg

Ken

Add a reply
Sponsored Links
Register or log in to remove.
MRFS   07-28-2009 at 05:01:26 AM
- 0 +

It's actually over-clocked from 400 to 444.5 MHz,
so your RAM is effectively "DDR 889" (444.5 x 2).

The timings are excellent too.

Can you post a screen shot of the SPD tab?


MRFS

Message quoted 1 times
Reply to MRFS
niklas_13   07-28-2009 at 05:03:04 AM
- 0 +

To me it looks like its @ 444.5 MHz


DDR2 800 Should be @ 400.0 MHz as some have said its double pumped for 800 Mhz

------------------------------ P55-UD4P / i5 750 @ 3.6 180X20 / GSkill 1600 @ 1420 7-7-7-22 / WD Black 640 / HD 5850 / Corsair 750 / Win 7
Reply to niklas_13
masterjaw   07-28-2009 at 05:25:32 AM
- 0 +

On what voltage your ram is running? Plus what is the specs of the ram?

It's overclocked with nice timings. If your PC is doing fine then go with it.

Reply to masterjaw
Kenster1025   07-28-2009 at 06:03:03 AM
- 0 +

MRFS wrote :

It's actually over-clocked from 400 to 444.5 MHz,
so your RAM is effectively "DDR 889" (444.5 x 2).

The timings are excellent too.

Can you post a screen shot of the SPD tab?


MRFS


http://i19.photobucket.com/albums/b155/COOLKID185/NewPicture11.jpg
So even though I haven't had any BSOD, thanks to the heat spreader on the RAM since it is DDR2 Reaper HPC edition

Just so then I know though, what would all my FSB Settings have to be.
Currently it is at
FSB Mode: Linked
Ratio: Should be 3:2(But it is probably since I am running 4 DIMMS)
FSB (QDR) 1333.3

MEM MHz: 800.

Really I am still a bit rusty at it.
What do I need to do correctly based on the SPD informatation. My board is an Asus P5N-D BIOS: 1101(Current)
No problems though, but that is since there is a heatsink. And I was playing GTA IV, for the past 3 hours.
Thanks
Ken


Message edited by Kenster1025 on 07-28-2009 at 06:09:21 AM
------------------------------ I own a Intel Core 2 Duo E8400, a PC Power and Cooling 750w Silencer, Asus P5N-D, EVGA 9800 GTX+, 4 GB of DDR2 800 MHz OCZ Reaper HPC Edition
 Reply to Kenster1025
Kenster1025   07-28-2009 at 02:22:12 PM
- 0 +

I figured it out, I had to change the Mode to Unlinked, and change the Ratio to Auto, and so I am now running at 800 for the Mem.

------------------------------ I own a Intel Core 2 Duo E8400, a PC Power and Cooling 750w Silencer, Asus P5N-D, EVGA 9800 GTX+, 4 GB of DDR2 800 MHz OCZ Reaper HPC Edition
 Reply to Kenster1025
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > Memory > Are these setting Correct for DDR2 800
Go to:

There are 1231 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.599 seconds
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them