DG41TY gives two beeps while compleeting post

[bineesh jose]

Intel DG41TY motherboard gives two beeps while completing post instaed of usal one.
I wish to knwo the reason behind it.
No other issue system work normaly after this two beeps.

 

[outlw6669]

I believe two short beeps normally refers to a memory error.
As your system is booting/running fine however it could be normal for your motherboard.
Unfortunately your Manual only lists a few beep codes and a double short beep is not among them.

Just to be sure it is not a memory issue, check your RAM with Memtest and make sure there are no errors.

 

[bineesh jose]

No its not a memory related issue.
In all motherboards its giving the same kind of post beep.
One beep gives while the display appear on the screen and one while system starts to boot from any boo table device.
Any idea why it is differ from normal Intel boards.
I am sure its normal behavior.

 

[Grizzly Adams]

I have built about 20 systems now that have the Intel DG41xx motherboards. They all give two beeps. It is normal for the new 4x chipsets. At one time I knew what each beep meant, but now I have forgotten.

 

[ibnsina]

the first thing do is update the Bios.

Not all manufactures use the same beeb codes. According to Intel, two beebs is Parity Error. http://www.intel.com/support/motherboards/desktop/sb/cs-010249.htm

Looks like your computer has memory problems, it could be video memory . If all your memory tests good, you probably need to exhange the motherboard.

 

[bineesh jose]

I know its not an error the beeps are normal. any one will able to give the differnce why in all otherboard its giving one beep and on D41RQ 2 beeps