IDE and Sata Tags: Hard Drives SATA Connection Storage Last response: September 30, 2010 11:17 AM in Storage Share delanoman September 30, 2010 6:39:04 AM I wanna connect a IDE drive as a slave with a SATA drive as a master because I need to take some information out from the IDE Hard drive, or there are another way to make this? More about : ide sata MechaNintendoMaster September 30, 2010 11:17:15 AM Just have the sata drive in sata0 port. Plug the IDE drive in normally. You should be done. m 0 l Can't find your answer ? Ask ! Publish Related resources SolvedMaking my Sata drive the boot drive instead of the IDE Forum SolvedUpgrading from an IDE HDD to a SATA SSD and HDD Forum SolvedIDE/SATA cable AC Power Converter Forum SolvedConverting SATA ports IDE to AHCI BIOS help Forum SolvedIDE , ATA , PATA , SATA... can you please explain these? Forum SolvedSamsung 120gb EVO slow on sata2 and IDE Mode! Need some solutions. Forum Solvedusing HDD IDE in a new MB support Sata ports only Forum SolvedIDE to Sata Forum SolvedHow can I use a SATA and an IDE HDD together? Forum SolvedLooking for a compact USB 3.0 Sata/Ide Enclosure Forum SolvedSATA Hard Drives and IDE Hard Drive not Working... Forum SolvedIDE to SATA ? Forum SolvedHow to connect IDE DVD writer, SATA HD to motherboard Forum Solvedmy 160 GB hard drive is not showing in the my computer panel when connected through SATA IDE cable but it is moving when conn Forum SolvedIDE in SATA Forum SolvedIDE to sata converter not working Forum SolvedTrying to Recover data using sata IDE cable but it's SO SLOW Forum SolvedReplacing a IDE dvd burn drive with a SATA burn drive? Forum SolvedUsing my old ide drives on my only-sata mobo Forum Solvedide to sata adapter Forum More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !