Gigabyte MA790FXT Question

vokal

Distinguished
Aug 26, 2009
7
0
18,510
Hay
I have read a few threads here about this board lookin for help
I have the MA790FXT-UD5P
AMD 955be
4g muskin
ATI 4870 video 1 gig
2 x 1 t hdd
500 watt psu

computer is unstable - locks up some times or restarts then locks up loading windows
Is there anything i can do to try to stop this
I have flashed the bios to the newest 1 on Gigabytes site
Newest drivers for the ati card and sound
Did any of you who have this board have to set up your ram in the bios ??
Did any of you have this problem ?\any input would be great

 
You need to put the memory voltage if different from 1.8v in the bios.
Run memtest86+ and check for errors.
Are those 4 sticks or 2 sticks of RAM?
Tell us more about that power supply, model and brand.
 

vokal

Distinguished
Aug 26, 2009
7
0
18,510
psu is a
Ultra LS500 Lifetime Series 500W Power Supply - ATX, SATA-Ready, PCI-Express,

Item Number: ULT-LS500
Model: LS500

Ram
Mushkin XP3-12800 DDR3-1600MHz 4GB (2x2GB) XP Series Cas 7-7-6-18 (1.85-1.9V) 240pins (996601)Mushkin XP3-12800 DDR3-1600MHz 4GB (2x2GB) XP Series Cas 7-7-6-18 (1.85-1.9V) 240pins (996601)

I will check the bios and see what the voltage is set at when i get home soon !
I did put in the timing tho
other then that i didnt touch a thing in the bios
set hdd boot seq

 

vokal

Distinguished
Aug 26, 2009
7
0
18,510
OK i git home and looked at memory voltage
was set to 1.6 to i pushed it to 1.9 will see what happens
 

vokal

Distinguished
Aug 26, 2009
7
0
18,510
so far its holding
just played fallout 3 @ full res for a hour
maybe that was my problem. The M B just under powered the ram ?
 

vokal

Distinguished
Aug 26, 2009
7
0
18,510
MIght of solved this on my own
4 hours and no restart
crysis at full res even benched it @ around 35 frames/sec
sweet ill keep this tread updated
 

heydan

Distinguished
Jul 24, 2009
97
0
18,630
Hi!, i have the same problema too, this is my system:

MoBo ga-ma790fxt-ud5p
CPU phenom II x4 955
2x1Gb 1066 Mhz
1x2Gb 1066 Mhz
HDD Seagate 500gb 16mg
sapphire 4870 1gb vapor-x
PSU cooler master real power pro 850w

Could you resolve the problem?, please if you do, can you tell me what exactly you do? thanks!
 

vokal

Distinguished
Aug 26, 2009
7
0
18,510


Hello
Yes I was able to resolve the problem
You must flash the Bios to the newest one from the Gigabyte site
In my case The Bios had set the ram to 1.5 volts and it needed to be 1.9 volts

What kind of ram do you have ?????
What voltage dose it say it needs to run????
Go into the bios and manually set the timings and voltage I think this will sole your problems

Let me know

Good Luck !!!!!!!