Sign in with
Sign up | Sign in
Your question

How to activate all services in services msc

Last response: in Windows XP
Share
August 17, 2011 6:39:46 AM

Iam safaring with services in my nootbook so kindly help me to solve the problem
how to activate all services in services msc
August 17, 2011 6:49:29 AM


Hello and welcome to Tom's Hardware Forums.

Some Services aren't necessary but you can use the list services.msc shows you to statr and individual Service or to set it to Automatic so it starts with the system.

Some Services will refuse to change because they are dependent on others so it would be better for you to tell us which Service you're suffering from so our advice can be tailored to the problem.

m
0
l
August 17, 2011 12:13:54 PM

To make sure these services are running:
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, double-click on Automatic Updates and then click Properties.
4. In the Startup type list, select Automatic and click Apply.
5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.
6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply.
8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
9. In the list of services, double-click on Event Log and then click Properties.
10. In the Startup type list, select Automatic and click Apply.
11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
m
0
l
!