Amd 1055t voltage

[jchambers2586]

I just got me a 1055t set the voltage to 1.45. CPU ID shows 1.5 volts I am trying to figure out why the voltage is going past the setpoint

mother board is ASUS M489gtspro/usb3


Link http://img130.imageshack.us/f/stressxr.png/

 

[henydiah]

yeah, Vcore 1,5 for 3.9Ghz to high,
Vcore 1.5 must get 4Ghz or more

Use soft Software CPUI-Z,
HW Monitor Pro (Real Temp )

i have 1055T test with Intel burn test (OS win7) OCCT LINKPACK (OS 64bit) let see my test :

http://i1238.photobucket.com/albums/ff496/BOSDOT/OC/testIBT20X.jpg
http://i1238.photobucket.com/albums/ff496/BOSDOT/OC/trytestLINKPACK.jpg
http://i1238.photobucket.com/albums/ff496/BOSDOT/OC/_DSC0399.jpg

 

[jchambers2586]

still the same

http://img251.imageshack.us/f/cpus.png/

 

[henydiah]

ok, your temp is Idle. but you test again with OCCT : Lincpack 100%CPU 90%freemem set 1 hour / Intelburn Test 20X max RAM, and open HW monitor pro together you can see high for full load, if under 60*C safe for Dailly, If over 60*C go down your Vcore & FSB

 

[jchambers2586]

Here is my cooler http://img200.imageshack.us/i/thumbuv.jpg/

My temps do not go past 45C. I am worried about the V core I do not want to fry it due to high voltage. I am not worried about temps.

 

[henydiah]

cooler Noctua i see, this is problem to affraid than Vcore or temperature, i more affraid with Temperature not Vcore , remember Master Overclocker in competition them over Vcore high etc clock 6.7Ghz Vcore 1.8xxx in recommendation and reference Max Vcore1.50 and see! they use Liquid Helium Extreme and temperature still above 60*C , it's mean I more affraid with temperature

 

[jchambers2586]

cooler Noctua i see, this is problem to affraid than Vcore or temperature, i more affraid with Temperature not Vcore , remember Master Overclocker in competition them over Vcore high etc clock 6.7Ghz Vcore 1.8xxx in recommendation and reference Max Vcore1.50 and see! they use Liquid Helium Extreme and temperature still above 60*C , it's mean I more affraid with temperature

so what your saying is don't worry the V core voltage as long as the temps are fine? I thought too much v core would kill it.

 

[henydiah]

If don't worry temperature try don't use HSF & Vcore default turn on your PC temp overheat .. and so... your Proc will be DEAD, if use GOOD HSF Overvolt Vcore best performace and can get Clock speed Maximum , this just sharing sorry...

 

[jchambers2586]

Is turbo core worth using I have the cpu over clocked to 3.9GHZ

 

[henydiah]

turbo core just work max 3.7Ghz not 3.9ghz this must be disabled C1E & Power Now

 

[jchambers2586]

ok. so is it worth using if I were going to down clock the cpu down to 3.7 GHZ

 

[henydiah]

yes it worth !
if your mobo Good OC 3.7xx Ghz CPU vcore just 1.36~1.40 check with your Stability test, for 3.8 Ghz still worth , if you like you can see my OC 1055T with Cool n Quiet Enabled (C1E & Power Now)
http://i1238.photobucket.com/albums/ff496/BOSDOT/OC/test38GhzIBT20x.

 

[jchambers2586]

sorry your link does not work.

 

[jchambers2586]

v core is 1.88 at idle then it shoots up to 1.5 under load is this normal.

 

[henydiah]

ok may be was deleted by me, sorry..., vcore 1.48 (not1.88 too high) really good for 3.9xxx & FSB 280 & 4Ghz it's more stabil with test stability , i use vcore 1.44 clock 3.85 FSB 275 for dailly very very stable , rendering movie, game no problem! C1e & Powernow still Enabled but turbocore not worth

http://i1238.photobucket.com/albums/ff496/BOSDOT/3824001000ok.jpg
http://i1238.photobucket.com/albums/ff496/BOSDOT/test38GhzOCCTLP.jpg
http://i1238.photobucket.com/albums/ff496/BOSDOT/test38GhzIBT20x.jpg