I've looked around but thought I would ask myself.
I originally started with a ASUS P6T Deluxe V2 motherboard, it was running great although it had an issue of resetting the CMOS when I unplugged it or switched the power off due to the C.P.R function thinking it failed to overclock (I did replaced the CMOS battery). I RMA'd the board to back Newegg for a replacement (only opinion) out of anger and bought a EVGA X58 SLI LE.
I have been using the EVGA X58 SLI LE since and it runs just fine (slow POST though, about 30 seconds), and today I just got my replacement board for the ASUS P6T Deluxe V2. I was originally going to sell the replacement, but I'm wondering if I should try my luck with the ASUS board again and try to sell the EVGA instead.
Hello there, sorry to hear you're having problems with this board as i am about to get one myself
Anyway, interested in your problem, i did a quick search and came up with a reply from a gentleman who claims the p6t series mb's are plagued with crook cmos batteries. Bad batch hopefully?
I quote: "A weak CMOS battery can cause the board to seem DOA and other strange behavior. The P6T series is notorious for having weak/dead CMOS batteries. Replace the battery with a new one to see if anything changes, and before you ask NO you can't use your volt-meter to test a battery, you need a battery tester for that."
When I am trying to figure out the best product between multiple products, I use Newegg's customer ratings. First look at what percentage of people rated it 3 or 4 eggs. If its not 80% I don't even consider it. Next look at the percentage of people that rated it 1 egg. If it's more than 10% I don't even consider it. I like to have at least 100+ customer ratings, but when I adopt early that's not always possible. When I still have a 'tie' between multiple products, I look at each customer's experience with manufacturer support.
The one component where I don't look at reviews is for the case. It needs: #1 - Fan capacity. #2 - as little plastic as possible.
This has worked for me quite well. Since I started this methodology, I've never had a component fail. I'm still running my original 36GB Raptor after 5 years.