Prolimatech Vortex fans

I was asking the same question couple months ago with no avail,where are you plan to install them ?

If there good i plan to put two on the side panel of the xigmatek utgard

they sure worth a try (good looking fans),don't forget filters;
http://www.frozencpu.com/products/9586/ffi-32/ModRight_...
if you end up getting them ,please report back and let us know,good luck

hmm Ok thanks, ill probably get some. Though what i was going to do was since they're both on top of each other id have the bottom one extract air from the gpu and the top intake air, would that work fine? Cause i have the TwinFrozer II on the gpu and that pumps alot of hot air into the case

I would provide fresh air toward GPU insted,what size is the exhaust fan on top(170mm) ?

Theres a 120 intake at the front, a 120 extract at the back, in the roof a 170 extract, the two vortexs' would be on the side panel, one at the height of the cpu cooler and one at the height of the gpu/psu

You can upgrade top exhaust fan to 200/220 for better air flow

i dont think it will fit one, i think i can do 2x 120 though

Uploaded with ImageShack.us

http://benchmarkreviews.com/index.php?option=com_conten...

No thats the side panel, but i dont have the Utgard-mesh ive got the Utgard-original

ok good set of 120mm will do i guess ,bottom line is to improve exhaust

I have this side: http://www.azcs.co.uk/attachment.php?attachmentid=490&c...

So would you have both side 140s as intakes? If 2 top 120mm would be better than the 170 included then ill get those eventually, some of these maybe? http://www.scan.co.uk/products/120mm-sharkoon-golf-ball...

i dont know how powerful that 170 is but there is nothing like a good fan controller and what you can do with it,there is no specs( RPM) on that golf ball fan ,but looking at the blades ,it will move some air
EDIT;1200rpm..little low

"So would you have both side 140s as intakes?"- YES

Ok thanks, just need to find some dust filters on sale in the UK and ill get them this or next month.

Ok im gonna order some, would these dust filters be good? http://www.amazon.co.uk/140mm-Aluminium-Mesh-Fan-Filter...

I'm not familiar with the peculiar one,the only reason i linked you with ModRight FilterRight is the ease of use (metal screen) i just wipe it with my finger,but any filter is better then no filter at all (make sure it wont restrict the air flow)

The fan is meh, at full speed there is a humming noise which personally annoys me, wheres as at low speed the air flow is very minimal. Im going to look around and try something else.

Thank you for reporting back ,glad i did't buy them (some mnf. will try anything to push the product out the door)

I only heard about them because the CustomPC magazine used them on heatsinks that came without fans, i was only able to get one anyway, seems they've been discontinued.

Do you know any good alternatives?

I end up buying this fan for 140MM rad ,it's not the best" looking girl "but she sure knows how to move   could be audible if you don't own a fan controller
http://www.frozencpu.com/products/12099/fan-784/Scythe_...
You from Europe so this may come handy;
http://www.xtremesystems.org/forums/showthread.php?p=46...