Sign in with
Sign up | Sign in
Your question

Overclocking fail

Last response: in Overclocking
Share
November 27, 2010 10:36:10 AM

Hi guyz,

I tried to overclock my Intel celeron D 331 with a Asus P5B-VM. But when I pass a cpu frequency of 147, the system doesn't boot up anymore. I just
installed a watercooling kit to overclock it... And now it seems to fail. Does anybody have a clue? Because I tried everyting and it doesn't seem to work out. I'm running on BIOS 0901.

These are my settings:

JumperFree:

CPU frequency: 148
DRAM frequency: 533 MHz
PCI Express frequency: 100
Spread spectrum : Disabled
Memory voltage: 1.90
VCore Voltage: 1.35

CPU configuraton:

Ratio CMOS setting: 20
Max CPUID Value limit: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled


Hope anyone can help me Just ask if you need more information!

Thx!!!!

p.s. Sorry for my bad english.. I'm a dutchieeee

More about : overclocking fail

a b K Overclocking
a b à CPUs
November 27, 2010 12:35:25 PM

Overclock that cpu ?
Is it worthy ?
Increase the fsb and v core.
Check maximum recommended v core range for your cpu -And dont go beyond that-
November 27, 2010 1:20:57 PM

55Range said:
Overclock that cpu ?
Is it worthy ?
Increase the fsb and v core.
Check maximum recommended v core range for your cpu -And dont go beyond that-


Well, it's for a school project.. I know the processor and mobo are not so good, but that doesn't matter.
I did increase the fsb and the v core.. And still it's not booting.
Related resources
a c 197 K Overclocking
a c 172 à CPUs
November 28, 2010 1:55:43 AM

What kind of memory do you have?

Your memory settings may be limiting your overclock. Find a BIOS setting that will set your memory clock to twice your FSB frequency.

And it may be that you have reached the limits of your CPU chip.
December 3, 2010 5:16:07 PM

/me goes off topic

HAHA, i like your nick :D 
!