how to install wd caviar blue
Last response: in Storage
Need help .... Installed New WD's cavier blue 500 GB, conected standard
sata cable to mother board, and then sata power supply... but it wont
power up......
any one help..
sata cable to mother board, and then sata power supply... but it wont
power up......
any one help..
More about : install caviar blue
Are you sure it's not powering up, or is it just that you don't see an icon for the drive in Windows Explorer?
If it's the latter, you need run Disk Management:
- Start -> right-click "Computer" -> click "Manage"
- Click the "Disk Management" link in the left pane
- Find the disk in the LOWER portion of the middle pane and right-click to partition and format it.
If it's the latter, you need run Disk Management:
- Start -> right-click "Computer" -> click "Manage"
- Click the "Disk Management" link in the left pane
- Find the disk in the LOWER portion of the middle pane and right-click to partition and format it.
Related ressources:
- ForumWD Caviar Blue 500GB Hard drive not being shown...
- ForumBiostar H55A+ will not detect WD 500gb Caviar Blue
- ForumHDD Failure? Western Digiatal Caviar Blue WD 800JD
- ForumMy WD Caviar Black is slower than blue ?
- ForumWD Caviar Blue not showing all space in XP
- ForumWD Caviar Blue no recognized by bios?
- ForumWD Caviar Blue vs Seagate Barracuda
- ForumWd caviar blue no longer detected
- ForumWD caviar green slow..
- ForumWD Caviar Black vs Barracuda 7200.12
- ForumWD Caviar Blue and Black
- ForumWD Caviar Black HDD’s and RAID
- ForumOS on Caviar Blue ?
- ForumWD Caviar Blue - Can't boot but can use in dual boot. Help plz
- ForumBios detecting version of windows that are no longer there
- ForumWD Caviar Blue - Can't boot but can use in dual boot. Help plz
- ForumHDD Install problem - C: Partition
- ForumSlow file transfer with Caviar GP and Windows 7
- ForumHow do i install and have a master ide hdd and a slave sata hdd
- ForumWestern Digital Caviar green 1TB
- More resources
Read discussions in other Storage categories
