According to my logic and intels website
the highest temp for this cpu (e7200) is 65c and the safe voltage range is 0.8-1.36
My ave temp is between 37-40c under full load at a bios V of 1.21 and CPUZ reads 1.168-1.20
I'm running my NB at the lowest V I can with this mobo, 1.20
My ram is set to the manufacturers settings on the package, 4-4-4-12 2.1v being DDR2 800mhz it's rated for 400mhz dram freq. And mines running at 350mhz
So far with no errors for the last 4 hours in prime98 and as long as no errors occur I'm assuming I have my settings stable and safe?
BTW I have crashed a few times and that is how I arrived at the settings I am at currently
__________________
CPU: e7200 1.168v 3.33ghz
RAM: Patriot PC2-6400 4-4-4-12 8gb
MOBO: Asus P5N-D
Graphics: EVGA 8800gt 1gb
Sound: Creative Soundblaster Xtreme Gamer
Cooling: Antec skeleton, thermal take cpu heatsync
OS: Windows 7 Ultimate 64 bit
the highest temp for this cpu (e7200) is 65c and the safe voltage range is 0.8-1.36
My ave temp is between 37-40c under full load at a bios V of 1.21 and CPUZ reads 1.168-1.20
I'm running my NB at the lowest V I can with this mobo, 1.20
My ram is set to the manufacturers settings on the package, 4-4-4-12 2.1v being DDR2 800mhz it's rated for 400mhz dram freq. And mines running at 350mhz
So far with no errors for the last 4 hours in prime98 and as long as no errors occur I'm assuming I have my settings stable and safe?
BTW I have crashed a few times and that is how I arrived at the settings I am at currently
__________________
CPU: e7200 1.168v 3.33ghz
RAM: Patriot PC2-6400 4-4-4-12 8gb
MOBO: Asus P5N-D
Graphics: EVGA 8800gt 1gb
Sound: Creative Soundblaster Xtreme Gamer
Cooling: Antec skeleton, thermal take cpu heatsync
OS: Windows 7 Ultimate 64 bit