Sign in with
Sign up | Sign in
Your question
Closed

RAM settings

Last response: in Overclocking
Share
December 23, 2010 7:01:34 PM

how do i check if my ram is running at its rated settings?

More about : ram settings

Best solution

December 23, 2010 7:18:32 PM

Download CPU-Z. I believe it shows frequency and timings.
Share
December 23, 2010 7:25:37 PM

ok under memory is all 9.0 how do i change the cas to 7 and the frequency is only 600mhz while its a 1333 Mhz stick..
Score
0
Related resources
December 23, 2010 7:26:23 PM

This must be done in the BIOS. Have a look around, there should be a setting for memory somewhere in there.
Score
0
December 23, 2010 7:29:42 PM

ok thanks. what should i watch out for? so i dont kill my ram or motherboard or anything else.
Score
0
December 24, 2010 11:52:54 PM

keith808 said:
ok thanks. what should i watch out for? so i dont kill my ram or motherboard or anything else.


Just don't play around with voltages and you can't hurt anything permanently. If you run your RAM out of specification with regard to timings it just won't work until you adjust them back to normal ranges. If you would like some help adjusting these settings I'm sure the folks over at the Overclocking board would be more than happy to help. I'm not a OC'ing expert, I just know how to do the basics, so I don't want to give you bad info. :pt1cable: 
Score
0
a b } Memory
a b K Overclocking
December 25, 2010 12:06:41 PM

In cpuz 600mhz is 1200mhz effective, ddr= double data rate. You can set ram voltage and timings in bios(on most motherboards) to specs and is safe and recommended.
Score
0
December 25, 2010 10:14:22 PM

ohh thanks guys =D
Score
0
a b K Overclocking
January 21, 2012 5:52:41 PM

Best answer selected by mousemonkey.
Score
0
a b K Overclocking
January 21, 2012 5:52:45 PM

This topic has been closed by Mousemonkey
Score
0
!