CASE MOD - Is this OK?

[nvidia3569]

O.K. So Ihave a NZXT Tempest and did some mods to it.Stripped it down and painted it flat black with chrome Bays and motherboard tray.The case normaly has two 120mm intakes in the front which are still there but the cages are flat black now.1 120MM fan in the rear for exhaust, which I changed for the 120mm LED off the side of the case and put in the rear for exhaust. As for the fan on the side of the case there is now a 1400mm intake. The case also has 2 140mm on top for exhaust which were changed for so chrome ones the have a better cfm rating. added a 140mm at the bottom in front of the cage for extra intake and a 92mm next to hdd for intake on the top cage. due to 2 GTX 285's, because when overclocked they get really hot. (Pic to view below) note: Mother board and psu are RMA and will be here soon. I will post completed rig in the near future, but my main concern is weather or not this setup will be o.k. I have also made some mods to the mother board tray to allow better cable managment. Oh almost forgot theres a q6600 going onto a evga 750i sli ftw motherboard with a xigmatek s1283 cooler/artic silver 5. PSU - Corsair HX1000, and 8gb corsair xms2 800mhz ddr2. PLEASE LET ME KNOW WHAT YOU THINK.

http://i689.photobucket.com/albums/vv256/jrmitchell1983/DSCF1078.jpg

http://i689.photobucket.com/albums/vv256/jrmitchell1983/DSCF1079.jpg

http://i689.photobucket.com/albums/vv256/jrmitchell1983/DSCF1081.jpg

 

[jsc]

Please do not double post.

 

[medjohnson77]

I think it will work and the tempest is a very nice case. I did some mods to mine also, came out very nice. Good luck with your rig.