Sign in with
Sign up | Sign in
Your question

P2 Connector

Last response: in Components
Share
July 15, 2009 8:08:47 PM

I have a Dell Vostro with a 4-pin connection. The old power supply has "P2" stamped on it.

The new power supply, a Corsair tx850w does not have a 4-pin but rather an 8-pin connetor.

What do I do now?

More about : connector

a c 144 ) Power supply
July 15, 2009 8:28:16 PM

The 8 pin plug separates into two 4 pin plugs.
a c 243 ) Power supply
July 15, 2009 8:40:34 PM

That's a monstrous psu for a small Dell.
Related resources
July 15, 2009 9:46:56 PM

who told you to get a psu that big? and yes the connector does comes apart
July 15, 2009 10:25:30 PM

jsc said:
The 8 pin plug separates into two 4 pin plugs.



Thanks ... you are da man!!!!
July 16, 2009 7:08:43 AM

The 8 pin comes apart.You just have to make sure you put the right 4 pin plug in.I know,they are different,but I've also seen people force the wrong one into the plug on the board and create havoc with thier MB.Just separate the 8 pin into two 4 pin plugs.Inspect each one carefully and then select the right one to use.Goodluck.

Dahak
!