GA-EP45-UD3P Cntrl I does not work

[scbarry]

I am tryng to setup up a RAID 1 through the Intel Sata Controller ICH10HR on my Gigabyte Moto GA-EP45-UD3P. I went into the BIOS and set SATA as RAID. After reboot I see the option to hit Cntrl I, which I do repeatedly and there is not response. I took the board back to the store and got a replacement I am having the same issue. What am I missing?

 

[Shadow703793]

Have you tested the keyboard?

 

[rand_79]

hold control key hit I key about 50x

http://america.giga-byte.com/FileList/Manual/motherboard_manual_ga-ep45-ud3p_e.pdf

page 87

 

[scbarry]

Have you tested the keyboard?

I thought about that also, since the KB I am using is wireless. But the <del> key works to get into the bios.

 

[scbarry]

I changed keyboards and it worked.

Thnx for the replies