I7 950 voltage overclock

[vino_05]

Hello,
Hey guys i would like to ask why does sometimes my core #3 in core temp has only 50 percent load? Im running P95 large fft. I overclock it by 4009 mhz. I think after 30 mins of running p95 core #3 will down its load to 50%? Is my temp good for stability? Im just aiming for 4 GHz on air coolers. Thanks

i7 950
cooler master v10
x58a-ud3r ver 2
12gb ram kingston 1333
xfx 5870 crossfire

frequency: 4 GHz {167x24}
QPI: auto {6.01 GHz}
Uncore CR: x18 {3006 MHz}

mem. frequency: 167 X 8 {1336 MHz}
PCI E: {100 MHz}

Voltage All auto Except:
CPU Vcore: {1.26875V}
DRAM Voltage: {1.300V}

Temp:

idle: {40 C}
max load: {76 C}

 

[videl]

pick up your pcie frequency a little to improve stability...and you can try picking up the cpu vtt voltage a little to see improvement in stability...and stress test the cpu using intel burn test...set the threads to 8 and ram whatever you want to and test...
76 on load is starting to push it a little...you definitely don't want to go over 85...or at least I wouldn't...but 76 will not kill your chip or anything, so on air that's ok I'd say...