Ddr3 1600 1.65 V 9-11-11-29 timings BSOD

[tonyr1512]

I bought 2 2x2 gb corsair 1600 memory from best buy the other day. The memory had regular heat sinks on them, but since it was rated at 1600 and 1.65 I did it. Was running fine till today, I got Blue Screen of death today and powered down, touched the heat sinks and they were hotter than hell. I was running the memory for a few days fine. So since the error happened i decided to run just 1333 at 1.5 voltage. so now i run memtest86 and all is fine but i get an error on test 6 and 5200mb its not massive amount of errors. what do you think i should do, I thought corsair was a good brand?

 

[scout_03]

check one at the time see which one give the error,if they still on warranty try rma

 

[tonyr1512]

my timmings are incorrect its 9-9-9-24. its all around the 5200 range. i tried it even down to 1066 still errors out not as much though, could timmings be the culprit

 

[scout_03]

gave the memory number so could see spec on corsair

 

[henydiah]

under default voltage RAM have error in memtest86+?...
try in other slot memory.. try 1 by 1 , if all error you need RMA
RAM have error not good for System ,