Sign in with
Sign up | Sign in
Your question
Solved

P8p67 and thermaltake frio

Last response: in Overclocking
Share
January 14, 2011 6:08:38 AM

I was wondering if anyone knew if the ThermalTake Frio cpu cooler would fit the P8P67 Deluxe? I know the socket works out, but the on board heatsinks might be a problem. I know it will go over at least two (likely three of them) but I don't know if it would be "high enough" at that "distance out" from the center.

Below is an image showing the ram slots(pixel resized to match the estimated size of the cooler, assuming ddr3 ram is 13cm) overlayed as a best guess to the size.

Thanks to anyone who has any information on this problem.

More about : p8p67 thermaltake frio

Best solution

January 14, 2011 3:02:02 PM

It shouldn't be an issue if the Frio has any height associated to the heat pipes.the main bulk should hover over those heatsinks on the mainboard.
Share
January 14, 2011 10:19:40 PM

Ripthruster said:
It shouldn't be an issue if the Frio has any height associated to the heat pipes.the main bulk should hover over those heatsinks on the mainboard.

It does have some height, though I can't guarantee how much :) , thanks for the reply, and I guess we shall see.
m
0
l
January 15, 2011 9:58:59 AM

Best answer selected by tsuris.
m
0
l
!