Sign in with
Sign up | Sign in
Your question
Solved

Com wont boot after switching sata slot and installing new GPU

Last response: in Storage
Share
November 29, 2010 6:17:05 AM

Well I bought a new graphics card and just install it into my computer.The Sata slot which connects to my harddisk was blocking the GPU.So i install it into slot 3.But then it wont boot up.All i see is a ACER sign and it freezes there.I have tried put the old Graphics card in with the harddisk connected to slot 1 and 3 and the same thing happens.Can anyone help me?

Best solution

a c 226 U Graphics card
a c 96 G Storage
November 29, 2010 11:39:48 AM

Go into your BIOS and make sure your system recognizes your HDD on the other SATA port. Assuming it does, make sure your boot order is set to boot from your HDD.

Also, verify that all of your SATA and power connecters are securely fastened.

Last, what was your old graphics card and what is your new one?
Share
December 5, 2010 8:46:54 AM

COLGeek said:
Go into your BIOS and make sure your system recognizes your HDD on the other SATA port. Assuming it does, make sure your boot order is set to boot from your HDD.

Also, verify that all of your SATA and power connecters are securely fastened.

Last, what was your old graphics card and what is your new one?


The bios wont boot. anyway thanks alot.I have tried plugging out certain wires and parts.And its working.
m
0
l
December 5, 2010 8:47:05 AM

Best answer selected by progunnerboi.
m
0
l
!