What should the hyper transport nb speed be at?

Hey
I got a biostar a770e and a phenum x3 8450 e 2.1 and I oc it to 2.5, but also the ht and nb speed went up. default was 1800 1800 so i lowered then to nb 1400 ht 1200 and after oc cpu to 2.5 they are both at 1928mhz is that good or bad? was reading that it should be around default so should i lower it more?
4 answers Last reply
More about what hyper transport speed
  1. Nb Frequency can vary with different settings. As long as you have a reliable stable overclock after testing there is no need to be concerned with the NB frequency.
  2. o ok thxs for info
  3. leonnee said:
    Hey
    I got a biostar a770e and a phenum x3 8450 e 2.1 and I oc it to 2.5, but also the ht and nb speed went up. default was 1800 1800 so i lowered then to nb 1400 ht 1200 and after oc cpu to 2.5 they are both at 1928mhz is that good or bad? was reading that it should be around default so should i lower it more?



    I have the same chip. but on a ecs 740gm-m mobo. w/ 4gb ddr2.
    RAM Speed : 420 MHz (1:2) @ 5-5-5-12

    can i get a higher speed than Freq : 2205.06 MHz (210.01 * 10.5) , with stock cooling?
  4. i think so try and watch the temperature i got my at 2.46 right now with 44c understress well i do have a pretty huge aftermarket fan right now trying to oc to 2.6 with 2.46 my vcore is 1.25, hmm weird thing cpuz says 1.187
Ask a new question

Read More

Motherboards Default Biostar Overclocking