Sign in with
Sign up | Sign in
Your question

EX58-UD3R, i7 920 C0 OC issues

Last response: in Overclocking
Share
February 1, 2011 7:00:19 AM

Mobo: EX58-UD3R
Bios Version: F11
CPU: I7 920 C0
Ram: Patriot Viper Extreme 2000MHZ http://www.overclockers.com/patriot-viper-extreme-12gb-...
CPU Cooler: Coolermaster V8

I'm having issues. My goal is a 3.8 or 4.0 ghz OC, with ram @ 1800mhz+. I had a stable OC (or so i thought), until today when I installed a new HDD and rerouted all of my cables (ended up unplugging many things, replugging htem).

When I booted, my previously 8+ hr prime95 stable OC failed in bios. I'm an idiot, and dont have the numbers written down.

So I reset cmos, started fresh, and after multiple hours of toying, I'm stuck again.

Where should I start? Do I set the ram timings to "auto", try to get a stable OC, then handle the ram later?

Please help me, I'm so frustrated.

More about : ex58 ud3r 920 issues

February 1, 2011 7:17:08 AM

Some toying with it, is IOH at 1.2 necessary? Also, should my uncore be exactly 2x my memory multiplier? or would 1 higher help with stability? i.e. x10 memory, x21 uncore.
m
0
l
February 1, 2011 8:13:35 AM

After some fudging, I had it run (a bit hot)

IOH & ICH 1.2v
VDIMM 1.66v
PLL 1.88v
qpi/uncore: 1.35v
vcore 1.4v
blck 191
Loadline calibration enabled

Now I need to figure out what to reduce to get temps back in line
m
0
l
February 1, 2011 10:21:52 AM

things fell apart, getting frustrated
m
0
l
!