Think going to OC my Q6600, need help
Last response: in Overclocking
Ok
I think I will try to OC my q6600 in my Dell XPS 420. I have read about the tape pin mod, is there any other mods for it?
So I only do the tape mod and use the stock huge cooler that Dell put onto it?
Use Artic thermal paste to put a seal back on it?
Will I fry my mb? What can I do to keep it from happening?
I think I will try to OC my q6600 in my Dell XPS 420. I have read about the tape pin mod, is there any other mods for it?
So I only do the tape mod and use the stock huge cooler that Dell put onto it?
Use Artic thermal paste to put a seal back on it?
Will I fry my mb? What can I do to keep it from happening?
More about : q6600
many risk than succes ! overclock is your own risk
Doing this will void your warranty. It is easily reversible however, a little nail polish remover or something will take the mod off.
1. get good PSU
2. You can buy "Silver conductive ink" from radio shack i believe.
3. guide : http://www.youtube.com/watch?v=9zUTI_LvjqM
IF YOU DO NOT EXPERIENCE IN TERM OF OVERCLOCK DO NOT DO THAT !
Doing this will void your warranty. It is easily reversible however, a little nail polish remover or something will take the mod off.
1. get good PSU
2. You can buy "Silver conductive ink" from radio shack i believe.
3. guide : http://www.youtube.com/watch?v=9zUTI_LvjqM
IF YOU DO NOT EXPERIENCE IN TERM OF OVERCLOCK DO NOT DO THAT !
henydiah said:
many risk than succes ! overclock is your own riskDoing this will void your warranty. It is easily reversible however, a little nail polish remover or something will take the mod off.
1. get good PSU
2. You can buy "Silver conductive ink" from radio shack i believe.
3. guide : http://www.youtube.com/watch?v=9zUTI_LvjqM
IF YOU DO NOT EXPERIENCE IN TERM OF OVERCLOCK DO NOT DO THAT !
Thanks, I live in Japan so I have to find it here. I think the computer is out of warrenty.
Going to build computer. Many people have said it works. No?
Best solution
exactly once, for your system works although it is not good in the oc, to the fore if you want to upgrade you can exploit some of the system for example: hdd, ram, cpu, psu (if good you can use it, vga, dvd room, casings etc in this you will only be burdened for the replacement of motherborad alone, P55 so is good for your cpu.
but after all it's different if you would change whole system, the new news is sandy ivy, AMD x6 , i7 or I5 750
but after all it's different if you would change whole system, the new news is sandy ivy, AMD x6 , i7 or I5 750
Related ressources:
- ForumHELP Please. OC Q6600 on P5KC @ 3.0 Ghz
- ForumNeed some help OC 'ing Q6600 w/ 680i SLI board
- ForumNeed help OC q6600 on Asus Striker II
- ForumMy Q6600 OC result., need help to reach higher if possible
- ForumOC 'ing Q6600 ( OC newbie here... help !)
- ForumHelp with OC 'ing a Q6600 on a evga nforce 750i sli board
- ForumLupiron: Need your Q6600 OC knowledge
- ForumQ6600 wont OC past 2.7 please help .
- ForumHello! i would like to OC my Q6600 . I have 0 exp, can you help
- ForumPlease help OC : q6600 and gigabyte GA-P31-S3G (F5 bios)
- ForumOC Q6600 stress testing help
- ForumHow to apply thermal compound & OC - HELP ! ( Q6600 + P35)
- Forum- help OC 'ing striker extreme and q6600 for med student
- ForumOC Tweaks for the infamous P5K-E, as in, I need them! (Runnin' q6600 )
- ForumHelp o/c q6600
- Forumhelp me get Q6600 OC 3.6g
- ForumI5 3570K + Z77 PRO3
- More resources
Read discussions in other Overclocking categories
!
