I've read a guide about this and did what it said, and so far, I'm stable for the stuff I do with the computer (gaming, video editing for youtube occasionally, movies).
Settings:
BCLK: 191
DRAM Voltage: 1.64 (my RAM is Corsair XMS3 DDR3 1600MHz 1.65v RAM)
CPU v-core: 1.2500
IOH Voltage and ICH Voltage: 1.2000
QPI Voltage: 1.35
Spread Spectrum (PCI and CPU): Disabled
Load Line Calibration: Enabled
Clock Skew (i think): Delay 300ps
Hyperthreading ON
c1E (power saver thingy) ON
Idle: 38-40C
BFBC2 Load (it uses a lot of the CPU): 63C
Prime95 for 20 minutes: 72C
I have a CoolerMaster Hyper 212+ Cooler with Arctic Silver 5 in an Antec 600 Case (stock fan on cooler)
Is this good? OK? Any suggestions?
Thanks.
Settings:
BCLK: 191
DRAM Voltage: 1.64 (my RAM is Corsair XMS3 DDR3 1600MHz 1.65v RAM)
CPU v-core: 1.2500
IOH Voltage and ICH Voltage: 1.2000
QPI Voltage: 1.35
Spread Spectrum (PCI and CPU): Disabled
Load Line Calibration: Enabled
Clock Skew (i think): Delay 300ps
Hyperthreading ON
c1E (power saver thingy) ON
Idle: 38-40C
BFBC2 Load (it uses a lot of the CPU): 63C
Prime95 for 20 minutes: 72C
I have a CoolerMaster Hyper 212+ Cooler with Arctic Silver 5 in an Antec 600 Case (stock fan on cooler)
Is this good? OK? Any suggestions?
Thanks.