Status
Not open for further replies.

jadavis1992

Distinguished
Feb 14, 2009
39
0
18,530
I currently have my x3 435 at 3.5 ghz from 2.9 ghz and 1.45 volts from 1.35 volts. My motherboard is an AsRock M3A770DE. The processor idles at ~35C and stays at ~65C at load using OCCT with the stock fan/heat-sink and IC diamond thermal paste . I would like to know if these numbers are safe or not, and any suggestions on a good cpu cooler for around $50 would be helpful.

Thank you much.

edit: Starting voltage was 1.425 not 1.35
 
Why so much voltage? You dont have to raise voltage to overclock, that is a myth. You should be able to get 3.5v on stock voltage. At 1.45v you should be hitting around 3.9ghz.

You only raise voltage if your stuck and want to go higher. Start by seeing how high you can get on stock volts.

Your temps will be much lower with lower voltage.

Coolermaster hyper 212+.
 

changwafu

Distinguished
Feb 10, 2011
26
0
18,540
im @ 3.555ghz stable w/ 1.525v on my athlon ii x4 640... (high voltage eh?)

54c-56c load temps using OCZ Vendetta 2...

i got a bad overclock cpu...

im gonna get a amd phenom ii 1090t anytime soon...
 


You'll have to, cause it won't last long like that.
 
Status
Not open for further replies.