Replacement fan(s) for Hyper 212+

[reprotected]

Hello. I am planning to get the Hyper 212+ in the future, and I really want to replace the stock fan with two better ones. These are what I had in mind:

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835185054&cm_re=120mm_fan-_-35-185-054-_-Product

- I like it's RPM and CFM for the noise it makes.

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835185139&cm_re=120mm_fan-_-35-185-139-_-Product

- It's thin, useful for facing the RAM side, though it has poor CFM. If I were to buy this, I would buy one, and another bulkier one with a higher air intake.

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835185092&cm_re=AP-15-_-35-185-092-_-Product

- It's unavailable, but it looks pretty good.

My planned system will be either Bulldozer (AM3+, same bracket as AM3, or Sandy/Ivy Bridge, LGA 1155), in a HAF922 or Storm Sniper with a 200mm side fan. RAM cooler optional.

If you guys have any better fans or coolers to recommend for me, please do

 

[Shadow703793]

1. Do note the Kaze is a 38mm fan and is unlikely to fit depending on your RAM slots,etc.

2. For CFM vs noise, I'd get the Gentle Typhoons. Great fans. Check Amazon, they usually have the Typhoons on sale.

>

My planned system will be either Bulldozer (AM3+, same bracket as AM3, or Sandy/Ivy Bridge, LGA 1155), in a HAF922 or Storm Sniper with a 200mm side fan. RAM cooler optional.

So wait, you don't have a PC to use this with right now? If so, I wouldn't bother with this until you have the PC built.

 

[davcon]

3000rpm Utra's are ridiculously loud btw.
You're much better off going with an S-Flex F/G or Kama 1600-1900rpm.
http://www.silentpcreview.com/article63-page2.html