Sign in with
Sign up | Sign in
Your question
Closed

STOP: 0X0000007B (0xF78d2524,0XC0000034,0X00000000, 0X00000000)

Last response: in Motherboards
Share
October 28, 2009 8:05:48 AM

I TOO HAVE A SIMILAR PROBLEM LIKE THE OTHER GUYS BUT THE ONLY DIFFERENCE IS THAT IT IS MY PC THAT'S SHOWING ME THIS BLUE SCREEN ERROR AND HALTING THE WINDOWS XP SP2 INSTALLATION.
STOP: 0X0000007B (0xF78d2524,0XC0000034,0X00000000, 0X00000000)

I HAVE TRIED 4 BOOTABLE WINDOWS XP SP2 CDS. RESULTS ARE ALL THE SAME. IT COPIES ALL THE NECESSARY FILES AND WHEN IT COMES TO THE MESSAGE THAT WINDOWS IS COPY SETUP FILES THE ERROR OCCURS.

MANY FORUMS I VISITED SAY THAT U HAVE TO UPGRADE TO VISTA, WHICH I AM NOT COMFORTABLE WITH.

a b V Motherboard
October 28, 2009 12:47:58 PM

One other thing i can think of:

Check your BIOS for a "virus protection" option for the boot sector. If its enabled, you can't install any OS. So disable it.
Related resources
Anonymous
a b V Motherboard
January 3, 2010 9:19:55 PM

The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.
December 30, 2010 10:11:27 PM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.



Hey Anonymous, thank you very much, you saved the day! :bounce: 
May 17, 2011 1:38:12 AM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.



Hi my reported problem is solved, Thank you very much for the answer given by you.

regards,
Ramu MG
ramumg@gmail.com
July 26, 2011 10:24:10 AM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.


Thanks a lot for the solution. I have been diggin' the net for days.
Thanks a lot again.
September 14, 2011 8:34:13 PM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.



I have been having an issue for about 2 weeks and I changed this and it worked fine. It was weird because it worked on the laptop that I used to create the image and the other laptops were the exact same model and as soon as I changed it, it booted up no problem.
Thanks bro
September 14, 2011 8:34:19 PM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.



I have been having an issue for about 2 weeks and I changed this and it worked fine. It was weird because it worked on the laptop that I used to create the image and the other laptops were the exact same model and as soon as I changed it, it booted up no problem.
Thanks bro
September 23, 2011 8:37:54 PM

Hi,

Am having this same problems, but with the added bonus of not being able to get into Windows at all (even in Safe mode) so don't get the Windows logo!!! anyway of accessing the BIOS through command prompt?
October 9, 2011 4:57:52 AM

Hi Anonymous, it worked for me. thank you very much. I spent days but could not figure out..thanks again
May 24, 2012 6:45:12 PM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.


Thank you so much, Anonymous. I was on the right lines, but didn't know what settings to alter, (and what to alter them to!)
You have saved me several days, and probably a huge bill.


Thanks again,

Roughchops :bounce: 
May 27, 2012 7:15:45 AM

Quote:
The problem is usually cause by AHCI/RAID mode of SATA controller. Enter BIOS art startup, go to "Integrated Periferals" or something similar where you can find the "SATA Mode" option and change it from AHCI to ATA or IDE or what looks like that.


I've been trying to figure this out for over a week. None of the solutions I've found (including this) have worked. I'm at a loss as to what is exactly the problem. Even the IBM IT guy I know is stumped. I know this thread is old, but does anybody have anything that can help me out?
Anonymous
a b V Motherboard
June 27, 2012 5:04:25 PM

hey ive been having this problem for some time now but i have like 6 sata drives called SATA-0 SATA-1 and up to sata-5 so i dont know wich ones to change can u guys plz help?
a c 256 Ĉ ASUS
a c 972 V Motherboard
June 27, 2012 11:01:27 PM

Open a new thread this one is 3 years old.
July 2, 2012 5:39:43 AM

THANKYOUUUU SONMUCHHHHHH!!!!
you saved me!!! :) 
a c 256 Ĉ ASUS
a c 972 V Motherboard
July 2, 2012 12:51:53 PM

This topic has been closed by Area51reopened
!